Recognition of pathway directions based on nonlinear least squares method

Abstract

In-pipe inspection is critical for using a pipeline safely. In recent times, the efficiency of inspection via the use of in-pipe robots has been emphasized in the literature. Inspection efficiency can be significantly improved if the in-pipe robot can move autonomously in the pipe. To do this, recognizing the pathway in front of the robot is a key factor. One method to recognize the pathway using the combination of a laser spot array (LSA) and a camera has been proposed long time ago. However, in this paper, the pathway direction is calculated with different way. The most different point is that the central vector of the pipe (the pathway direction) is estimated by Nonlinear least squares method with a constraint on the pipe radius. At last, their performances between our method and the existing method is compared in terms of accuracy and computation time.978-1-4673-9675-2/15/$31.00 © 2015 IEEE

Localization, Mapping, Navigation, and Inspection Methods in In-Pipe Robots: A Review

“…In [122], a controller for negotiating elbows in pipe based on differential motion is proposed. This paper [123] used a laser spot array (LSA) and a camera to find the pathway direction. To do so, the Levenberg-Marquardt method (LM method [124]- [126]) is applied as a solution to the nonlinear least square problem used to estimate the pipe central vector.…”

Robust Efficient Localization of Robots in Pipe Networks using a Particle Filter for Hybrid Metric-Topological Space

“…Finally, a binary measurement z t is made, equal to L if the robot detects that it is in a link, and equal to N if it detects that it is at a node. This kind of measurement can be made using visual [21], [22], [23], [24], [25], acoustic [26], [4], or inertial [27], [28] sensing, as has been demonstrated in previous work. This binary measurement contains no other information about the link or node it has detected, and represents the minimal measurement of this type that could be made.…”

Elbow Detection in Pipes for Autonomous Navigation of Inspection Robots

“…Kakogawa et al [15] use a 'Laser Spot Array' (LSA) and camera. They assume the radius of the pipe is known and state the accuracy of the system is inadequate, but they are able to identify junction types.…”