Preparation of robust, self-cleaning and anti-corrosion superhydrophobic Ca-P/chitosan (CS) composite coating on AZ31 magnesium alloy

The preparation and corrosion resistance of superhydrophobic coating on Cu plate via two-step electrodeposition

“…The peaks at 1,384 and 1,464 cm −1 corresponded to the bending vibration of C-H, whereas the peaks at 2,853 and 2,924 cm −1 corresponded to the stretching vibration of C-H (Liu et al , 2022a, 2022b). The peak at 1,026 cm −1 corresponded to the stretching vibration of Si-O-Si (Wang et al , 2022a, 2022b, 2022c), and the peaks at 1,636 and 3,412 cm −1 corresponded to the bending and stretching vibrations of O-H (Wu et al , 2023), respectively. This also indicated the successful deposition of polysiloxane on the surface.…”

Preparation and corrosion resistance of superhydrophobic Ni–Co–Al2O3 coating on X100 steel

“…Superhydrophobic surface droplets slide off easily, seemingly without any resistance, and have important applications in the elds of anti-corrosion, oil-water separation and self-cleaning. [24][25][26][27] Superhydrophobic surfaces can be created by combining micro-nano structures with the modication of low-surface energy materials in general. 28,29 On the basis of adding second-phase nanoparticles of Al 2 O 3 to the Ni-Co coating to enhance its corrosion resistance, the low surface energy modication technology is used to endow the coating with superhydrophobicity in order to expect a superhydrophobic composite coating with good hydrophobicity and excellent corrosion resistance, which can be widely used in soil corrosive environments.…”

Hydrogen bubble-templated electrodeposition of superhydrophobic Zn–Ni films

“…Magnesium and its alloys show great promising applications in biomaterials due to their excellent biocompatibility. 1 However, their applications are restricted as a result of their poor anticorrosion performance. 2 The self-cleaning effect of lotus leaves gives us infinite inspiration to research superhydrophobicity.…”