Preparation and mechanical properties of bacterial cellulose nanocomposites loaded with silica nanoparticles

Abstract

Bacterial cellulose (BC), which is produced by Gluconacetobacter xylinus (Ga. xylinus) in culture, is made up of a three-dimensional network of ribbon-shaped bundles of cellulose microfibrils. In the current studies, we used two processes to prepare nanocomposites of BC filled with silica particles. In Process I, Ga. xylinus was incubated in medium containing silica sol Snowtex 0 (ST 0, pH 2-4) or Snowtex 20 (ST 20, pH 9.5-10.0). The elastic modulus at 20°C was improved by keeping the amount of silica in the nanocomposites below 4% when ST 20 was used and below 8.7% when ST 0 was used. This process allowed incorporation of 50% silica in BC. Inclusion of higher amounts of silica reduced the modulus at 20°C and the strength of the nanocomposites below that of BC. X-ray diffraction measurements revealed that the silica particles disturb the formation of ribbon-shaped fibrils and affect the preferential orientation of the (110) plane. We also produced BC-silica nanocomposites by Process II, wherein the BC hydrogel was immersed in different concentrations of silica sols, allowing silica particles to diffuse into the BC hydrogel and lodge in the spaces between the ribbon-shaped fibrils. This method increased the modulus at 20°C and the strength compared to the BC matrix, but it was difficult to load the BC with more than 10% silica in this way.

Hybrid nanocomposite based on cellulose and tin oxide: growth, structure, tensile and electrical characteristics

“…Also, as mentioned in section 3.1, the nucleation and growth of tin oxide on cellulose disrupt the inter-and intramolecular hydrogen bonds of cellulose chains that partly accounts for the inferior tensile properties of cellulose-SnO 2 nanocomposites. Note that a similar reduction in tensile strength with the amount of inorganic component was reported previously for cellulose-TiO 2 [1] and bacterial cellulose-silica [23] nanocomposites.…”

Contribution of TEMPO-Oxidized Cellulose Gel in the Formation of Flower-Like Zinc Oxide Superstructures: Characterization of the TOCgel/ZnO Composite Films

“…Over the past decades, various methods have been developed to synthesize ZnO with various morphologies such as physical and chemical vapor deposition, thermal evaporation, metal-organic chemical vapor deposition and wetting chemical synthesis, template-assisted growth and solution-based approaches [16][17][18]. During the last decades, various studies concerning the control of the nucleation and the growth of ZnO nano/microstructures embedded in polymeric matrices have been reported, with a special emphasis on the particles morphological control and its influence on their physical properties [19,20]. In this context, Chiolerio et al have developed a method to fabricate a mem-sensor in which ZnO wires embedded in a polymeric matrix are ordered to create morphological anisotropy by means of dielectrophoresis [21].…”

Synthesis, Chemistry, and Medical Application of Bacterial Cellulose Nanocomposites

“…The addition of PBH to the culture media not only affected BC production, but also changed the morphology and crystallinity of BC [101]. Literature studies revealed several other examples of BC composites synthesized through the in situ approach [102,103].…”