Preparation and Electrospinning of Acidified-Oxidized Potato Starch

Abstract

This paper investigates the preparation and electrospinning of acidified-oxidized potato starch. In this article, acidified-oxidized potato starch was prepared by adding ammonium persulfate as an oxidizing agent and hydrochloric acid as a catalyst. The effect of reaction time, temperature, the concentration of hydrochloric acid and the content of ammonium persulfate on the viscosity and content of carboxyl were discussed. The optimum reaction conditions were as follows: 1.5 hours ,50°C, 0.5mol/l HCl, 2.5% (NH4)2S2O8. And then, the acidified-oxidized potato starch prepared at the optimum condition was dissolved in dimethyl sulfoxide (DMSO) to be electrospinned by contrast to native starch. Electrospinning of 5wt%-21wt% of modified starch in DMSO produced beads, beaded fibers, and smooth fibers, depending on the concentration range. Smooth fibers were observed until the concentration reached 19wt%, while native starch was 5wt%.

Preparation and Properties of New Starch-based Ceramic Body Reinforcing Agent

“…At the same time, 38.8 g chloroacetic acid and 8.23 g sodium hydroxide were added and stirred evenly for 2.5 hours. The resulting product was filtered with anhydrous ethanol, and dried to constant weight in a 60 ℃ oven [3] .…”