Power Loss Model and Efficiency Analysis of Three-Phase Inverter Based on SiC MOSFETs for PV Applications

Abstract

This paper presents the power loss model analysis and efficiency of three-level neutral-pointclamped (3L-NPC) inverter that is widely employed in solar photovoltaic energy conversion system. A silicon carbide (SiC) 3L-NPC inverter is developed in this paper by employing wide bandgap semiconductor power devices, such as SiC MOSFET and SiC diode (SiC D). These devices are used due to their superior characteristics over silicon (Si) semiconductor devices for the reduction of inverter power losses, and as a result, an improving efficiency at the high switching frequency. Accurate and detailed power loss calculation formula and power loss distribution over switching devices of the SiC 3L-NPC inverter are derived according to the modulation technique and inverter operation. The switching energy loss of SiC MOSFET is then measured and determined experimentally via inductive clamp double pulse test (DPT) at the real working condition of the circuit. Afterward, this experimental data is used in the thermal description file of the device's library of PLECS simulation software to determine the total power loss of SiC 3L-NPC inverter. The developed simulation model replicates the real operating conditions of the 3L-NPC inverter. This method gives results close to the practical test. Finally, the power loss of SiC 3L-NPC inverter is measured and compared with the theoretical results. Furthermore, SiC MOSFET and SiC D are employed to achieve high system efficiency at the high switching frequency. The results verify the features of SiC 3L-NPC inverter, the corresponding modulation technique used and their effects on reducing and improving power loss in solar SiC photovoltaic inverters. INDEX TERMS Three-level neutral-point clamped inverter (3L-NPC), SiC MOSFET, power loss, DPT-double pulse test, PLECS.

Cost-Effective Matrix Rectifier Operating With Hybrid Bidirectional Switch Configuration Based on Si IGBTs and SiC MOSFETs

“…Nevertheless, as seen in Table 2, the data on switching energy loss is limited to specific conditions and Table 2 must be determined under equal conditions. To determine such values, the DPT is adopted [18]- [21]. Fig.…”

Research on Single-Switch Wireless Power Transfer System Based on SiC MOSFET

“…According to (17) in section III, the voltage stress of the switch is calculated. Three kinds of switch devices are selected for comparison.…”

“…In view of the above problems, the use of SiC devices provides the feasibility of high frequency conversion of single switch circuits. Due to its high breakdown electric field intensity, good thermal stability, high carrier saturation mobility, good electrical conductivity, small dielectric constant and other excellent characteristics, SiC shows its advantages of high temperature resistance, high voltage resistance, high frequency performance and low switching loss [16], [17]. However, the application experience of SiC devices in various practical application circuits is less, especially in the single-switch circuit.…”

An Improved Voltage Clamp Circuit Suitable for Accurate Measurement of the Conduction Loss of Power Electronic Devices

“…Common methods for obtaining power loss are calorimetry [ 10 , 11 ], building a physical model [ 12 , 13 ], establishing a loss look-up table or fitting power loss as a function [ 14 , 15 ], and directly integrating the product of the square of the on-state current root mean square and the on-state resistance [ 16 ]. However, the above methods often introduce significant errors due to model or measurement problems.…”