Piezoelectric Size Effects in a Zinc Oxide Micropillar

Abstract

In this work, the dependence of piezoelectric coefficients (PE) on the size of artificial fabricated ZnO micropillars on Si substrate is investigated. ZnO full film is grown with c-axis orientation and an average grain size of 20 nm at a substrate temperature of 500°C by pulsed laser ablation. The micropillars with the size range of 1.5 to 7 μm are formed by top-down semiconductor device processing. The PE, characterized by piezoelectric force microscopy (PFM), is found to increase from 18.2 to 46.9 pm/V, when the ZnO pillar size is reduced from 7 to 1.5 μm. The strong PE dependence on ZnO pillar size can be explained by local changes in polarization and reduction of unit cell volume with respect to bulk values. These results have strong implications in the field of energy harvesting, as piezoelectric voltage output scales with the piezoelectric coefficient.

Effect of SnO Composition in SnO/SnO2 Nanocomposites on the Photocatalytic Degradation of Malachite Green under Visible Light

“…Author Lei Li et al and Jinghui Wang et al, present the possible chemical reactions that produce SnO/SnO 2 nanocomposite in the hydrothermal process from the precursor SnCl 2 .2H 2 O + H 2 O + Urea are described as follows. [27,29]…”

A Review of Microwave Synthesis of Zinc Oxide Nanomaterials: Reactants, Process Parameters and Morphologies

“…The properties of nanostructures depend strongly on their size and shape [ 40 , 41 , 42 , 43 , 44 , 45 , 46 , 47 , 48 , 49 , 50 ]. The size-dependent effect of ZnO NPs has been observed on the: photocatalytic activity [ 337 , 338 , 339 , 340 , 341 , 342 ], catalyst activity [ 343 ], dielectric properties [ 344 ], piezoelectric property [ 345 , 346 ], breakdown voltage varistors [ 347 ], visible emission property of quantum dots displays [ 348 ], equilibrium constant of chemical reactions [ 349 ], gas sensing properties [ 350 , 351 , 352 ], thermal diffusivity of water nanofluid [ 353 ], photoluminescence [ 354 ], UV absorption [ 355 , 356 ], biomedical potential [ 357 ], toxicity [ 312 , 328 , 357 , 358 , 359 , 360 , 361 , 362 ], bioavailability [ 363 ], and interactions with biomatrices [ 364 ]. A nano ZnO material may be characterised by piezoelectric parameters of even a few times higher values than a bulk ZnO material […”

Sensitivity enhancement of the tactile sensor based on hydrothermally grown ZnO nanorods modified by catalytic Au nanoparticles

“…So far, many efforts have been made to remarkably improve the sensitivity and broaden detection modes of the ZnO NRs-based tactile sensors, including normal force, shear force and bending strain, by optimizing synthesis process and morphological parameters [20], and by designing novel microstructures of sensors [21,22]. Generally, to achieve higher piezoelectric performance, an effective control over their shape and crystallography for ZnO NRs should be desired, because the device performances depend on the morphological parameters of ZnO NRs [23]. Recently, it was reported that the gas sensors based on ZnO NRs modified by catalytic gold nanoparticles (AuNPs) exhibited a significant improvement in sensing performances to a variety of gases such as acetone [24] and methanol vapor [25], however, performance optimization of tactile sensors based on ZnO NRs modified by AuNPs has not still been reported.…”