Passive micropumping in microfluidics for point-of-care testing

Abstract

Suitable micropumping methods for flow control represent a major technical hurdle in the development of microfluidic systems for point-of-care testing (POCT). Passive micropumping for point-of-care microfluidic systems provides a promising solution to such challenges, in particular, passive micropumping based on capillary force and air transfer based on the air solubility and air permeability of specific materials. There have been numerous developments and applications of micropumping techniques that are relevant to the use in POCT. Compared with active pumping methods such as syringe pumps or pressure pumps, where the flow rate can be well-tuned independent of the design of the microfluidic devices or the property of the liquids, most passive micropumping methods still suffer flow-control problems. For example, the flow rate may be set once the device has been made, and the properties of liquids may affect the flow rate. However, the advantages of passive micropumping, which include simplicity, ease of use, and low cost, make it the best choice for POCT. Here, we present a systematic review of different types of passive micropumping that are suitable for POCT, alongside existing applications based on passive micropumping. Future trends in passive micropumping are also discussed.

Electrochemical Detection and Point-of-Care Testing for Circulating Tumor Cells: Current Techniques and Future Potentials

“…The methods based on POCT can be divided into self-driving testing and external force-driving testing according to driving force [31]. Self-driving detection includes the use of capillary effect, negative pressure, or chemical reaction to generate gas [32,130], etc. to promote the reaction and output related signals, the external force-driving detection usually uses hand push, finger trigger button etc.…”

Capillary-Driven Flow Microfluidics Combined with Smartphone Detection: An Emerging Tool for Point-of-Care Diagnostics

“…Several device modifications have been attempted to overcome this challenge, such as by varying the dimensions of microchannels to control fluid movement [ 12 ] and the incorporation of porous materials at the outlets to absorb the fluid and increase micropumping time [ 27 ]. Furthermore, liquid evaporation may also occur after capillary fill and depends on the microchannel dimensions and temperature of the devices [ 84 ].…”

Passively Driven Microfluidic Device with Simple Operation for Quantitative Droplet LAMP Sssay for Point-of-Care Analysis

“…Passively driven MF avoids bulky external supporting equipment and only employs basic laboratory instruments such as micropipettes by utilizing surface tension, pressure-driven gravity, osmosis, vacuum suction and capillary force as the movement forces [27][28][29][30] . Such an emerging strategy for the movement of nucleic acid samples is achieved with characteristics including easy fabrication, a lack of external power, low cost, compactness and portability.…”