Parametric Analysis and Design Optimization of a Pyrotechnically Actuated Device

Abstract

A parametric study based on an unsteady mathematical model of a pyrotechnically actuated device was performed for design optimization. The model simulates time histories for the chamber pressure, temperature, mass transfer and pin motion. It is validated through a comparison with experimentally measured pressure and pin displacement. Parametric analyses were conducted to observe the detailed effects of the design parameters using a validated performance analysis code. The detailed effects of the design variables on the performance were evaluated using the one-at-a-time (OAT) method, while the scatter plot method was used to evaluate relative sensitivity. Finally, the design optimization was conducted by employing a genetic algorithm (GA). Six major design parameters for the GA were chosen based on the results of the sensitivity analysis. A fitness function was suggested, which included the following targets: minimum explosive mass for the uniform ignition (small deviation), light casing weight, short operational time, allowable pyrotechnic shock force and finally the designated pin kinetic energy. The propellant mass and cross-sectional area were the first and the second most sensitive parameters, which significantly affected the pin's kinetic energy. Even though the peak chamber pressure decreased, the pin kinetic energy maintained its designated value because the widened pin cross-sectional area induced enough force at low pressure.

Numerical Simulation for the Combustion of a Zirconium/ Potassium Perchlorate Explosive inside a Closed Vessel

“…The values for R, c p and c v are obtained using CEA. A more detailed description of the 0-D internal ballistics code is provided in Ref [1].…”

“…It rapidly generates both hot gases and condensed combustion products, which serve as a driving force during combustion. PAD types include pin puller [1] and pyro valve [2], among others [3]. PADs are one-shot devices, but they can determine the success or failure of a mission.…”

Design and mathematical modeling of a pyrotechnically actuated water inlet device

“…A pyrotechnic cutter is widely used in the belt connection structure, and Xiong et al [5] established a finite element simulation model of the cutter to provide help for the design optimization of the cutter and the study of its action mechanism. In addition, Han et al [6] carried out a systematic study on the design and optimization of a PAD, established a model to analyze the sensitivity of the design parameters, and improved the working performance of the device.…”

Modelling and experimental study on dynamics of a gas-driven split nut device

“…Lee [27] developed a one-dimensional gas dynamic model to reveal unsteady effects of the gas in a chamber during pyrotechnic separation. Han [28] established an unsteady gas model with the pressure and temperature in a combustion chamber as variables, and experimental and simulation results are compared. In dynamics of separation devices, Li [29] built a simplified model to describe pyrotechnic separations of an explosive bolt, which provides an effective analysis method for design of a separation system of Long March 3B satellite.…”