Organic Rankine Cycle Power Systems : A Review

Abstract

The cumulative global capacity of organic Rankine cycle (ORC) power systems for the conversion of renewable and waste thermal energy is undergoing a rapid growth, and is estimated to be approx. 2, 000 MW e considering only installations that went into operation after 1995. The potential for the conversion into electricity of the thermal power coming from liquid-dominated geothermal reservoirs, waste heat from primary engines or industrial processes, biomass combustion, and concentrated solar radiation is arguably enormous. ORC technology is possibly the most flexible in terms of capacity and temperature level, and is currently often the only applicable technology for the conversion of external thermal energy sources. In addition, ORC power systems are suitable for the cogeneration of heating and/or cooling, another advantage in the framework of distributed power generation. Related research and development is therefore very lively. These considerations motivated the effort documented in this article, aimed at providing consistent information about the state, and future of this power conversion technology. Firstly, basic theoretical elements on the thermodynamic cycle, working fluid, and design aspects are illustrated, together with an evaluation of the advantages and disadvantages in comparison to competing technologies. Then, a compendium of the many aspects of the state of the art is illustrated: the solutions currently adopted in commercial plants and the main-stream applications, including information about exemplary installations. A classification and terminology for ORC power plants are proposed. An outlook on the many research and development activities is provided, whereby information on new high-impact applications, such as automotive heat recovery is included. Possible directions of future developments are highlighted, ranging from efforts targeting volume-produced stationary and mobile mini-ORC systems with a power output of few kW e , up to large MW e base-load ORC plants.

Modelling of organic Rankine cycle power systems in off-design conditions: An experimentally-validated comparative study

“…Nowadays, the total power capacity installed worldwide is estimated at 2 GWe [4] and ORC-based power 20 systems have continuously been gaining in interest for more than a decade. As a figure of merit, the number of papers yearly published about organic Rankine cycles is illustrated in Figure 1.…”

Viscosity of oxygenated fuel: A model based on Eyring’s absolute rate theory

“…( 12) is the compressibility factor, and it has been proved that the precision of the compressibility factor values has negligible influence on the accuracy of the viscosity calculation [59]. Therefore, to insure the universality and simplicity of the model, the 1 The full names of these substances are given in Table S2.…”

“…Nowadays, with the increasing attentions on environmental protection, many researches related to new environment-friendly technologies and substances have been carried out, such as organic Rankine cycle [1], absorption refrigeration [2], concentrated solar power syngas production [3], supercritical water gasification [4], ionic liquid [5], new refrigerant [6] and especially, oxygenated fuel [7]. The oxygenated fuel compounds are oxygen-containing hydrocarbons which are either naturally presented in fuels or used as additives to improve certain properties of interest.…”

Dynamic performance of a novel offshore power system integrated with a wind farm

“…The working fluid is benzene (molecular weight 78.11 g • mol −1 , critical temperature and pressure 288.9 • C and 49.9 bar). This compound is widely adopted for operating ORC systems in this range of temperature, see, e.g., Colonna et al [13].…”