Optimization of Resistance Spot Welding (RSW) Parameters by using Taguchi Method

Abstract

This study was intended to optimize the resistance Spot Welding Parameters (RSW) of sheet metals joints. The variation parameters selected were electrode force, welding current and welding time of 1.2 mm thickness low carbon steel. The settings of process parameters were conducted according to the L9 Taguchi orthogonal array in randomized way. The optimum process parameter was then obtained by using signal to noise ratio and analyzed further on the significant level by using Analysis of Variance (ANOVA). The developed response has been found well fitted and can be effectively used for tensile shear strength prediction. The optimum parameters achieved were electrode force (2.3 kN), welding time (10 cycles) and welding current (8 kA). Based on the ANOVA, it was found that the electrode force is a vital parameter in controlling the tensile shear strength as compared to welding time and welding current.

Pengaruh Arus Dan Waktu Pada Micro Resistance Spot Welding Terhadap Baja Aisi 304 Dan Aluminium Paduan

“…Keuntungan mRSW ini memiliki kecepatan yang tinggi dan dapat disesuaikan kebutuhan pada penggunaannya [5] .…”

Optimization Process of Double Spots Welding of High Strength Steel Using in the Automotive Industry

“…Nor Atirah Mat Yasin etal. [11]. Studied the optimization process for spot welding using various parameters such as welding current, welding time, and electrode force for low-carbon steel.…”