On a Jansen leg with multiple gait patterns for reconfigurable walking platforms

Abstract

Legged robots are able to move across irregular terrains and those based on 1-degree-of-freedom planar linkages can be energy efficient, but are often constrained by a limited range of gaits which can limit their locomotion capabilities considerably. This article reports the design of a novel reconfigurable Theo Jansen linkage that produces a wide variety of gait cycles, opening new possibilities for innovative applications. The suggested mechanism switches from a pin-jointed Grübler kinematic chain to a 5-degree-of-freedom mechanism with slider joints during the reconfiguration process. It is shown that such reconfigurable linkage significantly extend the capabilities of the original design, while maintaining its mechanical simplicity during normal operation, to not only produce different useful gait patterns but also to realize behaviors beyond locomotion. Experiments with an implemented prototype are presented, and their results validate the proposed approach.

Design and Experimental Evaluation of a Single-Actuator Continuous Hopping Robot Using the Geared Symmetric Multi-Bar Mechanism

“…It is important and necessary to optimize the dimension of the closed-chain mechanism [39]. Because of the dual-objective optimization, the special method of TOPSIS (Technique for Order Preference by Similarity to an Ideal Solution) was chosen for dimension optimization.…”

Design and Implementation of a Shape Shifting Rolling–Crawling–Wall-Climbing Robot

“…In the above mentioned scenario, the robot's ability to reconfigure itself enables rotational locomotion in addition to the conventional rectilinear motion and clockwise-counterclockwise rotation using omnidirectional wheels. Nansai et al have done consequential work on the dynamic walking gait generation using the reconfigurable Theo Jansen mechanism that enables the robot to traverse multiple terrains by varying the link length associated with it [11,12]. In addition to the adoption of a reconfigurable mechanism in the mechanical design and control, there are also attempts reported to integrate the bio-inspired principles in reconfigurability.…”

A velocity estimation algorithm for legged robot

“…5 As a major component sector of robot, the legged robot is one of the most versatile design strategies for robot locomotion. 6 The legged robot can be usually categorized into biped robot, quadruped robot, and hexapod robot. With only a group of point contact and a proper site as landing point, the legged robot can smoothly and effectively cross road obstacles.…”