Obtenção e avaliação de recobrimentos nanométricos à base de nióbio depositados por processo PVD em aço AISI M2.

Abstract

Niobium carbide (NbC) coatings doped with Nickel (Ni) were deposited by reactive DC-magnetron sputtering using methane (CH4) as carbon (C) source. Reference NbC coating was deposited with a total power of 2500 W and NbxNiyCz coatings were deposited by decreasing the power applied to the Nb target and increasing the power applied to the Nb-Ni target, giving rise to coatings with increasing Ni content. Structural and microstructural characterizations of NbC and NbxNiyCz coatings were performed using X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Raman Spectroscopy, Transmission Electron Microscopy (MET) and Scanning Electron Microscopy (MEV). Mechanical properties of the coatings were studied using the instrumented nanoindentation technique, in order to evaluate the Hardness (H) and Elastic modulus (E). The adhesion between coatings and substrate was evaluated using Rockwell C test and instrumented linear scratch tests. The tests for studying the thermal stability of the coatings were carried out in a controlled atmosphere chamber furnace at temperatures of 600 °C and 800 °C for 2h. Finally, the oxidation resistance of the coatings was studied by means of Thermogravimetric Analysis (TGA) tests of continuous and isothermal heating. The NbC and NbxNiyCz films in the as-deposited condition and annealed at 600 °C, showed good adhesion (failure mode HF1) to the AISI M2 steel substrate, indicating that the adhesion interlayer of the Cr, CrC and a gradient CrC/NbC layer was effective in avoiding adhesive failures. The increasing of Ni content in the structure of NbC coatings promoted the formation of nanocomposite structures, composed of a mixture of NbC and NiCx nanocrystallites. Additionally, the introduction of nickel allows increasing the hardness for the coatings in the as-deposited condition, from 17 to 25 GPa for Ni contents from 0 to 13 at. %, respectively, and, improving the oxidation resistance over the pure NbC coating, from 380 °C to 480 °C for the Ni-rich coatings. Finally, the thermal stability analyses showed that the NiCx precipitate decompose during the annealing treatments at 600 °C and 800 °C, which promoted an increase in the hardness and Young's modulus values for all coatings. These behaviors were attributed to the increase of crystallinity of the coatings.