Numerical Simulation and Analysis of Tapered Interference Fit of Atomizer Disk

Abstract

The contact analysis model of high speed centrifugal atomizer is created and stress distribution law is obtained by using ANSYS FEM software in this paper. The stress distribution along the axial direction is uneven, the stress of the small end of the taper is large and the stress concentration appears on both ends of the taper. In addition, the factors which influence the interference fit stress are researched and discussed. The interference fit stress is mainly influenced by the shrink range, while the influence from the friction coefficient is very weak. Comparing with the conventional design, the position and value of the stress and deformation of the parts can be known exactly and thoroughly by using the approach proposed in this paper. The method provides a very valuable reference to designing the best shrink range for engineering application.