Numerical Investigation on Enhanced Heat Transfer with Tilted Hypervapotron Structure of the Fusion Blanket

Abstract

High flux components in fusion reactor are designed to transfer high thermal loads from the core plasma under steady-state operation and emergency conditions. In order to improve the heat transfer ability, hypervapotron structure is proposed to promote the heat transfer performance by optimizing the thermal hydraulic design. In this paper, three-dimensional numerical simulation was carried out using CFD methods for the improved solution of the first wall. The results show that the heat transfer performance of the triangular fin structure with tilt angle of 30° is superior to 0 °, 15°and 45°. At a typical flow rate of 2 m/s, the heat transfer efficiency of the triangular fin with tilt angle of 30° improved by a maximum of 118.1% compared with that of the smooth flow channel. In addition, the heat transfer performance of the triangular fin structure is better than other fin structure, and its maximum temperature drops by 136.3K compared to the smooth flow channel. The design solution may provide a viable new method for efficient cooling of future fusion reactor components with high heat flux.