Numerical and experimental study of the combustion phenomenon when the compression ignition is fuelled with mineral diesel

Abstract

Purpose The purpose this experimentation is to study the combustion characteristics of compression ignition engine fuelled with mineral diesel. The reason behind the numerical simulation is to validate the experimental results of the combustion characteristics. Design/methodology/approach The numerical analysis was carried out in this study using MATLAB Simulink, and the zero dimensional combustion model was applied to predict the combustion parameters such as in cylinder pressure, pressure rise rate and rate of heat release. Findings Incorporating the dynamic combustion duration with respect to variable engine load in the zero dimensional combustion model using MATLAB Simulink reduced the variation of experimental and numerical outputs between 5.5 and 6 per cent in this analysis. Research limitations/implications Validation of the experimental analysis is very limited. Investigations were performed using zero dimensional combustion model, which is the very appropriate for analysing the combustion characteristics. Originality/value Existing studies assumed that the combustion duration period as invariant in their numerical analysis, but with the real time scenario occurring in CI engine, that is not the case. In this analysis, mass fraction burnt considering the dynamic combustion duration was incorporated in the heat transfer model to reduce the error variation between experimental and numerical studies.

Simulation analysis and performance optimization of the combustion process of the opposed cam piston engine

“…Energy exchanged through thermodynamic system boundary 33 . The thermodynamic system boundary consists of the inner wall of the power cylinder, the top end surface of the power piston and the lower end surface of the cylinder head.…”