Numerical and experimental investigation of the erosion of zirconia particulate‐reinforced epoxy matrix composites by angular silicon carbide particles

Abstract

An smooth particle hydrodynamics/finite element (SPH/FEM) model was developed to simulate the erosion of zirconia particle‐reinforced epoxy composites, due to the overlapping impacts of angular particles at both perpendicular and oblique incidences. For each composite target, multiple sub‐volumes, each having their own random reinforcement distribution, were modeled. The reinforcements were assumed as noneroding and nondeforming and were distributed in the modeled sub‐volumes according to the random distributions measured in the actual samples. Erosion tests were performed to verify the numerical model, and it was found that the erosion rates of the zirconia‐reinforced composites were in all cases significantly lower than the neat epoxy. The experimentally‐observed erosion mechanisms were successfully simulated by the model, and the predicted erosion rates matched the measured ones to within 2% to 11%. It is anticipated that similar models can be used to predict erosion of other particulate composite systems whose reinforcement erosion and fracture is negligible compared to the matrix erosion.

Structural, thermal, and mechanical properties of silanized boron carbide doped epoxy nanocomposites

“…Various approaches have been suggested to carry out the improvements in mentioned properties by the researchers. 1 Various inorganic particles such as silicon carbide, 2 graphene oxide, 3 carbon nanotubes, 4 graphite, 5 and nanofibers 6 have been frequently used to improve the physical, mechanical, and thermal properties of polymers.…”