Abstrak. Telah dilakukan penelitian tentang efek dari berbagai nilai wettability dari permukaan pada pool boiling heat transfer. Percobaan dilakukan dengan menggunakan air murni sebagai fluida kerja dan subcooling 0K. Heat transfer block yang digunakan adalah mirror surafce (dipoles tembaga) / hidrofilik, superhydrophilic / copper berlapis TiO2 and permukaan hidrofobik / PTFE. Hasil penelitian menunjukkan bahwa kinerja perpindahan panas dari permukaan dengan lapisan PTFE lebih baik di fluks panas rendah. Sedangkan untuk fluks panas menengah, permukaan superhydrophilic (TiO2) lebih unggul dibandingkan dengan permukaan hidrofilik dan hidrofobik.Kata kunci : Wettability, subcooling, super/hydrophilic, superhydrophilic, boiling Abstract. The effect of varying surface wettabilities on nucleate pool boiling heat transfer has been examined and investigated. The experiments were performed using pure water as the working fluid and subcooling 0K. The heat transfer block used were bare surface/hydrophilic (polished copper), superhydrophilic/TiO2-coated copperand hydrophobic/PTFE surface. The results showed that the heat transfer performance of surfaces with PTFE coating is better at low heat flux. While for intermediate heat flux, superhydrophilic surface (TiO2) is superior compared to hydrophilic and hydrophobic surfaces.