Novel electroluminescence technique to analyze mixed reverse breakdown phenomena in silicon diodes

Abstract

a b s t r a c tIn this paper a novel technique to analyze the low-voltage breakdown regime of silicon diodes is presented. It is shown that the field emission tunnel current component of the reverse current does not cause energy transitions of carriers, and therefore will not emit photons. All photons being emitted from the pn junction are due to avalanche electroluminescence as a result of hot carrier energy relaxation processes. Measuring the light intensity output as a function of reverse current, the two current components (field emission and impact ionization) can be extracted as a function of reverse voltage. The experimental results were verified using the differential dynamic impedance method, as well as fitting a theoretical model to the extracted tunnel current. The temperature coefficient of current also indicated the transition from tunneling to avalanche.

Spectral Characteristics of Hot Electron Electroluminescence in Silicon Avalanching Junctions

“…1) the aim was to achieve as high an electric filed as possible, without initiating field emission breakdown of the junction. Field emission breakdown will significantly reduce the internal quantum efficiency [25]. Under high electric field conditions, the spectral "signatures" that may potentially be observed as peaks in the emission spectrum for the different photon The photon energies of these "signatures" will be helpful in identifying the dominant light generation processes.…”

Approach to the physical origin of breakdown in silicon solar cells by optical spectroscopy

“…25 tunneling breakdown is demonstrated to emit no photons, we conclude that avalanche breakdown is mainly responsible for the reverse EL at all breakdown sites independently of their type. Measured spectra at tunneling breakdown in Ref.…”

Monolithically integrated Si gate-controlled light-emitting device: science and properties

“…Interface states at the Si-SiO 2 interface, presumably, contribute to internal field emission with surface breakdown effect [33,34]. Being different from the wave function penetration on gate capacitance of NMOSFET that is strongly dependent on doping density [35], PMOSFET is selected to realize the light intensity modulation via the gate terminal.…”