New insights into the use of glass cullet in cement composites - Long term examinations

Gołek, Łukasz

doi:10.1016/j.cemconcomp.2022.104673

Cited by 6 publications

(4 citation statements)

References 128 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…When it comes to mechanical strength, for all mortars, an increase is observed and this is due to the continuous hydration of the binder with the curing time [22]. In addition, the use of GP with a replacement of 50% of the cement decreases the mechanical strength in the short term.…”

Section: Resultsmentioning

confidence: 93%

“…This is due to a dilution effect, which is the immediate consequence of the substitution of a more reactive powder (cement) with a less reactive powder (GP) in the short term [12]. Nevertheless, the mechanical strength does not cease increasing with curing time [15,22,24]. This phenomenon is due to continuous pozzolanic reactions between portlandite (Ca(OH) 2 ) and silica originating from GP, as highlighted by Idir et al [55], in addition to the slag present in CEM III, as also demonstrated below by the TG analysis.…”

Section: Resultsmentioning

confidence: 99%

“…This could be an important step toward sustainable development [15,16]. Furthermore, glass powder provides additional performance in terms of workability [17], microstructure properties [18,19], mechanical strength performance in the long term [20][21][22], durability [23], and hygrothermal performance [16,24,25].…”

Section: Introductionmentioning

confidence: 99%

See 2 more Smart Citations

Insight into the Behavior of Mortars Containing Glass Powder: An Artificial Neural Network Analysis Approach to Classify the Hydration Modes

et al. 2023

View full text Add to dashboard Cite

In this paper, an artificial neural network (ANN) model is proposed to predict the hydration process of a new alternative binder. This model overcomes the lack of input parameters of physical models, providing a realistic explanation with few inputs and fast calculations. Indeed, four mortars are studied based on ordinary Portland cement (CEM I), cement with limited environmental impact (CEM III), and glass powder (GP) as the cement substitution. These mortars are named CEM I + GP and CEM III + GP. The properties of the mortars are characterized, and their life cycle assessment (LCA) is established. Indeed, a decrease in porosity is observed at 90 days by 4.6%, 2.5%, 12.4%, and 7.9% compared to those of 3 days for CEMI, CEMIII, CEMI + GP, and CEMIII + GP, respectively. In addition, the use of GP allows for reducing the mechanical strength in the short term. At 90 days, CEMI + GP and CEMIII + GP present a decrease of about 28% and 57% in compressive strength compared to CEMI and CEMIII, respectively. Nevertheless, strength does not cease increasing with the curing time, due to the continuous pozzolanic reactions between Ca(OH)2 and silica contained in GP and slag present in CEMIII as demonstrated by the thermo-gravimetrical (TG) analysis. To summarize, CEMIII mortar provides similar performance compared to mortar with CEMI + GP in the long term. This can later be used in the construction sector and particularly in prefabricated structural elements. Moreover, the ANN model used to predict the heat of hydration provides a similar result compared to the experiment, with a resulting R² of 0.997, 0.968, 0.968, and 0.921 for CEMI, CEMIII, CEMI + GP, and CEMIII + GP, respectively, and allows for identifying the different hydration modes of the investigated mortars. The proposed ANN model will allow cement manufacturers to quickly identify the different hydration modes of new binders by using only the heat of hydration test as an input parameter.

show abstract

Section: Resultsmentioning

confidence: 93%

Section: Resultsmentioning

confidence: 99%

See 1 more Smart Citation

Insight into the Behavior of Mortars Containing Glass Powder: An Artificial Neural Network Analysis Approach to Classify the Hydration Modes

et al. 2023

View full text Add to dashboard Cite

show abstract

“…Several decades ago, research started on the possibility of using waste glass in concrete production [107][108][109][110][111]. Recycling waste glass in the construction industry not only reduces the burden on landfills but significantly contributes to resource preservation and carbon footprint reduction [112,113].…”

Section: Waste Glass In Aggregate and Cement Replacement In Concretementioning

confidence: 99%

Demolition Waste Glass Usage in the Construction Industry

Tihomirovs,

Kara De Maeijer,

Korjakins

2023

Infrastructures

View full text Add to dashboard Cite

Waste glass is an endless issue for the majority of the countries in the world with a linear economy of usage of materials. Demolition waste is counted as part of total construction and demolition waste (CDW). Even today, there are some statistical problems with the quantification of demolition waste and dividing it from total CDW, since most countries do not provide such a division of waste types. The current review shows possible ways of utilizing waste glass in some useful products in the construction industry. It is elaborated using PRISMA@ methodology with bibliometric and qualitative methods to provide a systematical overview of the publications in the period from 2000 to 2023. The bibliometric search was handled with the application RStudio© using sources in the biggest database, Scopus. Most of the published research items are mainly focused on using waste glass in concrete applications. However, there are seven possible areas of waste glass application in the construction industry: concrete products, gypsum–cement composites, asphalt or concrete pavement, geopolymer mortars, foamed glass ceramics, glass ceramics, and soil foundation strengthening/stabilization. In its turn, the circular economy should be applied since it provides a prolonged turnaround of materials throughout their life cycle.

show abstract

Enhancing the corrosion resistance of recycled aggregate concrete by incorporating waste glass powder

Peng

Zhao

Ban

et al. 2023

Cement and Concrete Composites

View full text Add to dashboard Cite

New insights into the use of glass cullet in cement composites - Long term examinations

Cited by 6 publications

References 128 publications

Insight into the Behavior of Mortars Containing Glass Powder: An Artificial Neural Network Analysis Approach to Classify the Hydration Modes

Insight into the Behavior of Mortars Containing Glass Powder: An Artificial Neural Network Analysis Approach to Classify the Hydration Modes

Demolition Waste Glass Usage in the Construction Industry

Enhancing the corrosion resistance of recycled aggregate concrete by incorporating waste glass powder

Contact Info

Product

Resources

About