The paper presents a study on the infl uence of ground waste glass cullet, introduced as a component of Portland cements in the amounts of 5% and 35% by mass, on the properties of pastes and mortars. The pozzolanic nature of the additive was confirmed – the long-term compressive strength of cement composites has incre-ased, compared to the reference sample. However, a decrease in the early compressive strength was observed. Replacing part of the Portland clinker with ground waste glass cullet resulted in the reduction of the heat of hydration. It was determined that the degree of grinding has a signifi cant impact on the activity of waste glass cullet – in the case of the cullet ground to 5000 cm2/g, the beginning of the pozzolanic reaction was observed after 7 days, whereas for the cullet ground to 3000 cm2/g, the reaction was severely delayed. In the course of one year, no negative impact of the alkali-silica reaction on the strength and microstructure of mortars and pastes was observed, however, a longer study needs to be conducted to verify the results. The research proves that waste glass cullet can be potentially used as a main component of Portland cements, with no adverse effects on the properties of the composites.
Three dimensional printing is a promising new technology to erect construction objects. Around the world in every moment a new prototypes constructions are made by using this method. Three dimensional printing is taken into account as technology which can be used to print constructions in automated way on the Moon or Mars. The raw materials, which can be used with three dimensional printing have to fulfil basic requirements for those which are used in construction. That means that components of printing mortars are made from ingredients easily accessible in area nearby construction site and can be reusable. The cost of printing building objects due to that requirements is comparable to costs of traditional building, which are currently available. However additive techniques of printing needs a dedicated mortars for printer supplying. Characteristic for such mortars is: setting time, compressive strength, followability in the printing system, shape stability of every printed layer, controlling the hydration rate to ensure bonding with the subsequent layer, reusable capabilities, easily accessible raw materials, cost of such mixtures shouldn’t be too high in order to keep 3D printing competitive for traditional ways of building, mortar components should be recyclable and printing process should not influence negatively on an environment and people. All properties of printing mortars are determined by the device for additive application method. In this paper review of available materials used for three dimensional printing technology at construction site is presented. Presented materials were analysed in terms of requirements for building materials technology. Due to the lack of detailed information’s in available literature, regarding to the properties of raw materials, the results of this analysis may be used in the designing of new concrete mixtures for the use in three-dimensional printing technology for construction.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.