Abstract:In this work, nanoporous Cr thin film was designed by a novel method for the detection of toxic heavy metals based on surface-enhanced Raman spectroscopy. Nanoporous Cr thin film has been deposited on an aluminum substrate through a developed etching/DC electrodeposition technique of the hexagonal porous anodic alumina (PAA) template/Cr nanoparticles, respectively. The structures and morphologies of the fabricated samples were investigated by different characterization tools. The FE-SEM illustrates nanoporous … Show more
“…To provide overview of many functionalities discussed in Sections 4.1-4.7, they are gathered in the Table 2. [190] Gradient-index filters [191] Distributed Bragg reflectors [192] Optical bandpass filters [193] Human protein heavy ions real-time interaction monitoring [194] Tailoring of optical properties with pulse anodization [149] Design of phase shift defect in effective refractive index [195] Hybrid distributed DBRs and apodized GIF photonic structure [196] Characterization of thermotropic ferroelectric liquid crystals confined in the NAA [197][198][199] Glass transition of discotic liquid crystals in one-dimensional fluid [200] Adjustable optical anisotropy by self-assembly of liquid crystals confined in porous structure [201] Sensors NAA template-assisted fabrication of chromium substrate for SERS detection of heavy ions in aqueous solutions [202] Au NPs array on NAA for SERS detection of hemoglobin [203] Controlled fabrication of periodic plasmonic dimer arrays for SERS [204] Graphene-NAA composite for SERS sensing [205] Label-free optical sensor based on interferometric reflectance spectroscopy for TNF-α detection [206] NAA-based interferometer for copper sensing [207] In vivo nanotubes nanotoxicity study on murine model […”
Section: Examples Of Naa Applicationsmentioning
confidence: 99%
“…In recent years, the growth of publications reporting the use of NAA as a photonic structure can be observed. The value of its unique geometry has been demonstrated in many fields, for example as sensing platforms [ 202 , 203 ] providing a promising alternative over plasmonic nanoparticles. The idea to utilize NAA as a shadow mask to fabricate a surface covered with plasmonic dimers was presented by Schmidt et al [ 204 ].…”
The development of aluminum anodization technology features many stages. With the story stretching for almost a century, rather straightforward—from current perspective—technology, raised into an iconic nanofabrication technique. The intrinsic properties of alumina porous structures constitute the vast utility in distinct fields. Nanoporous anodic alumina can be a starting point for: Templates, photonic structures, membranes, drug delivery platforms or nanoparticles, and more. Current state of the art would not be possible without decades of consecutive findings, during which, step by step, the technique was more understood. This review aims at providing an update regarding recent discoveries—improvements in the fabrication technology, a deeper understanding of the process, and a practical application of the material—providing a narrative supported with a proper background.
“…To provide overview of many functionalities discussed in Sections 4.1-4.7, they are gathered in the Table 2. [190] Gradient-index filters [191] Distributed Bragg reflectors [192] Optical bandpass filters [193] Human protein heavy ions real-time interaction monitoring [194] Tailoring of optical properties with pulse anodization [149] Design of phase shift defect in effective refractive index [195] Hybrid distributed DBRs and apodized GIF photonic structure [196] Characterization of thermotropic ferroelectric liquid crystals confined in the NAA [197][198][199] Glass transition of discotic liquid crystals in one-dimensional fluid [200] Adjustable optical anisotropy by self-assembly of liquid crystals confined in porous structure [201] Sensors NAA template-assisted fabrication of chromium substrate for SERS detection of heavy ions in aqueous solutions [202] Au NPs array on NAA for SERS detection of hemoglobin [203] Controlled fabrication of periodic plasmonic dimer arrays for SERS [204] Graphene-NAA composite for SERS sensing [205] Label-free optical sensor based on interferometric reflectance spectroscopy for TNF-α detection [206] NAA-based interferometer for copper sensing [207] In vivo nanotubes nanotoxicity study on murine model […”
Section: Examples Of Naa Applicationsmentioning
confidence: 99%
“…In recent years, the growth of publications reporting the use of NAA as a photonic structure can be observed. The value of its unique geometry has been demonstrated in many fields, for example as sensing platforms [ 202 , 203 ] providing a promising alternative over plasmonic nanoparticles. The idea to utilize NAA as a shadow mask to fabricate a surface covered with plasmonic dimers was presented by Schmidt et al [ 204 ].…”
The development of aluminum anodization technology features many stages. With the story stretching for almost a century, rather straightforward—from current perspective—technology, raised into an iconic nanofabrication technique. The intrinsic properties of alumina porous structures constitute the vast utility in distinct fields. Nanoporous anodic alumina can be a starting point for: Templates, photonic structures, membranes, drug delivery platforms or nanoparticles, and more. Current state of the art would not be possible without decades of consecutive findings, during which, step by step, the technique was more understood. This review aims at providing an update regarding recent discoveries—improvements in the fabrication technology, a deeper understanding of the process, and a practical application of the material—providing a narrative supported with a proper background.
“…This means that absorbance increases in the visible region after the deposition of TiO 2 /TiN on the template. All the spectra exhibit PAOTterns oscillations of interference fringes 30 . There are very small interference fringes oscillations with the PAOT reflectance due to interference between the reflected light from the bottom (PAOT/Al) and top (PAOT/air) interfaces.…”
Section: Resultsmentioning
confidence: 95%
“…From this figure, there are three sharp peaks for the Al 2 O 3 template are located at 44.5, 65, and 78.1° for the growth directions (113), (214), and (119), respectively (JCPDS card # 01-089-4921). The sharp-peaks indicate the Al 2 O 3 template is crystalline and easy to fabricated using the Ni-imprinting technique 30 . Figure 3 ( a ) The XRD pattern for PAOT and TiO 2 /TiN, ( b ) EDX chart of PAOT, and ( c ) EDX spectra of TiO 2 /TiN.…”
The unique optical properties of metal nitrides enhance many photoelectrical applications. In this work, a novel photodetector based on TiO2/TiN nanotubes was deposited on a porous aluminum oxide template (PAOT) for light power intensity and wavelength detection. The PAOT was fabricated by the Ni-imprinting technique through a two-step anodization method. The TiO2/TiN layers were deposited by using atomic layer deposition and magnetron sputtering, respectively. The PAOT and PAOT/TiO2/TiN were characterized by several techniques such as X-ray diffraction (XRD), scanning electron microscope (SEM), and energy dispersive X-ray (EDX). The PAOT has high-ordered hexagonal nanopores with dimensions ~ 320 nm pore diameter and ~ 61 nm interpore distance. The bandgap of PAOT/TiO2 decreased from 3.1 to 2.2 eV with enhancing absorption of visible light after deposition of TiN on the PAOT/TiO2. The PAOT/TiO2/TiN as photodetector has a responsivity (R) and detectivity (D) of 450 mAW-1 and 8.0 × 1012 Jones, respectively. Moreover, the external quantum efficiency (EQE) was 9.64% at 62.5 mW.cm−2 and 400 nm. Hence, the fabricated photodetector (PD) has a very high photoelectrical response due to hot electrons from the TiN layer, which makes it very hopeful as a broadband photodetector.
“…Also, the majority of these studies do not demonstrate long-term H 2 production stability. Furthermore, the morphology of the microsized materials is uncontrolled [ 30 , 31 , 32 ]. In this study, a TiN/TiO 2 /Al 2 O 3 template photoelectrode was created and used to generate H 2 from sewage water splitting without the use of any sacrificing agents.…”
An aluminum oxide, Al2O3, template is prepared using a novel Ni imprinting method with high hexagonal pore accuracy and order. The pore diameter after the widening process is about 320 nm. TiO2 layer is deposited inside the template using atomic layer deposition (ALD) followed by the deposition of 6 nm TiN thin film over the TiO2 using a direct current (DC) sputtering unit. The prepared nanotubular TiN/TiO2/Al2O3 was fully characterized using different analytical tools such as X-ray diffraction (XRD), Energy-dispersive X-ray (EDX) spectroscopy, scanning electron microscopy (SEM), and optical UV-Vis spectroscopy. Exploring the current-voltage relationships under different light intensities, wavelengths, and temperatures was used to investigate the electrode’s application before and after Au coating for H2 production from sewage water splitting without the use of any sacrificing agents. All thermodynamic parameters were determined, as well as quantum efficiency (QE) and incident photon to current conversion efficiency (IPCE). The QE was 0.25% and 0.34% at 400 mW·cm−2 for the photoelectrode before and after Au coating, respectively. Also, the activation energy was 27.22 and 18.84 kJ·mol−1, the enthalpy was 24.26 and 15.77 J·mol−1, and the entropy was 238.1 and 211.5 kJ−1·mol−1 before and after Au coating, respectively. Because of its high stability and low cost, the prepared photoelectrode may be suitable for industrial applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
