No abstract

No abstract

The influence of the hole transport layer on device stability in polymer:fullerene bulk‐heterojunction solar cells is reported. Three different hole transport layers varying in composition, dispersion solvent, electrical conductivity, and work function were used in these studies. Two water‐based hole transport layers, poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) and polyaniline:poly(styrene sulfonate), and one isopropyl alcohol‐based polyaniline:poly(styrene sulfonate) transport layer were investigated. Solar cells with the different hole transport layers were fabricated and degraded under illumination. Current–voltage, capacitance–voltage, and capacitance–frequency data were collected at light intensities of 16, 30, 48, 80, and 100 mW cm−2 over a period of 7 h. Device performance and stability were compared between nonencapsulated and encapsulated samples to gain understanding about degradation effects related to oxygen and water as well as degradation mechanisms related to the intrinsic instability of the solar cell materials and interfaces. It is demonstrated that the properties of the hole transport layer can have a significant impact on the stability of organic solar cells.

Three-dimensional supercrystals of plasmonic nanoparticles are a novel class of materials with exciting applications in technologies such as light harvesting or metamaterials. However, their realization relies on extraordinarily regular colloidal building blocks and accurate self-assembly methods. We present here a simple and up-scalable protocol for the synthesis of smooth gold nanospheres with high monodispersity in size and sphericity. The synthesis involves rapid growth up to the desired size and subsequent removal of surface roughness via an efficient etching step, so that nanospheres with diameters ranging between 10 and 110 nm can be obtained in large quantities. Upon functionalization with thiolated polyethylene glycol and low surfactant concentration, Au nanospheres were employed as building blocks to produce uniform arrays of micron-sized 3D pyramidal supercrystals over large areas, by means of a template-assisted approach. Focused ion beam cutting and SEM characterization revealed a face-centered cubic lattice within individual pyramidal supercrystals.

Toward a smart optical biosensor based on nanoporous anodic alumina (NAA): by modifying the pore geometry in nanoporous anodic alumina we are able to change the effective medium at will and tune the photoluminescence of NAA. The oscillations in the PL spectrum are converted into exclusive barcodes, which are useful for developing optical biomedical sensors in the UV-Visible region.

In this study, we report about the structural engineering and optical optimization of nanoporous anodic alumina rugate filters (NAA-RFs) for real-time and label-free biosensing applications. Structurally engineered NAA-RFs are combined with reflection spectroscopy (RfS) in order to develop a biosensing system based on the position shift of the characteristic peak in the reflection spectrum of NAA-RFs (Δλpeak). This system is optimized and assessed by measuring shifts in the characteristic peak position produced by small changes in the effective medium (i.e., refractive index). To this end, NAA-RFs are filled with different solutions of d-glucose, and the Δλpeak is measured in real time by RfS. These results are validated by a theoretical model (i.e., the Looyenga-Landau-Lifshitz model), demonstrating that the control over the nanoporous structure makes it possible to optimize optical signals in RfS for sensing purposes. The linear range of these optical sensors ranges from 0.01 to 1.00 M, with a low detection limit of 0.01 M of d-glucose (i.e., 1.80 ppm), a sensitivity of 4.93 nm M(-1) (i.e., 164 nm per refractive index units), and a linearity of 0.998. This proof-of-concept study demonstrates that the proposed system combining NAA-RFs with RfS has outstanding capabilities to develop ultrasensitive, portable, and cost-competitive optical sensors.

Modern‐day wonders of the world: Nanostructured films of plasmonic pyramid arrays (see picture) were prepared by the simple stamping of preformed homogeneous nanocolloids. These materials show very high efficiency as optical enhancers and can be exploited for the design of quantitative, cheap, portable, and ultrasensitive optical sensors with excellent reversibility.

No abstract