Multi-mode-segmented scan architecture with layout-aware scan chain routing for test data and test time reduction

Abstract

Broadcast-based test compression techniques can reduce both test data and test time. However, the success of such methods heavily depends on the percentage of test patterns that can be broadcasted. In this paper, we first conduct a quantitative analysis that shows the simple broadcast architecture that cannot achieve good test time/data compression even under a test set with very high level of don't care bits. A multi-mode-segmented scan test architecture (MSSA) is then presented to solve the problem of low broadcast rate. Three operation modes are supported in this architecture: broadcast, multicast and serial. As a result, improved test data compression is achievable with limited hardware overhead, as serial-mode operations are largely eliminated. An algorithm for the two-way partitions of the scan segments is proposed to construct multicast mode configurations. Finally, we present a layout-aware scan chain ordering method to further improve test compression. The problem of ordering scan cells in multiple scan chains is mapped to a constrained standard cell placement problem in physical synthesis, and the simulated annealing method is used to solve the problem. The routing length of the scan chains are also taken into account in the ordering process

Physical Aware Approaches for Speeding up Scan Shift Operation in SoC

“…Flip-flops are reordered at the placement stage by reducing the length of nets between scan cells and wiring congestions. Scan-chain reordering has been investigated in [8] and [15]. We use a scanchain reordering method for speeding up scan shift operations.…”