Modular solid‐state pulse generator based on multi‐turn LTD

Abstract

A modular solid-state pulse generator based on a multi-turn linear transformer driver (LTD) is designed for the application of pulse power techniques with a high voltage, large current and wide pulse width. The LTD adopts the method of multi-turn winding on the magnetic core, which can help to output pulses of wide width. The isolation of the power supply with windings in the same direction of the LTD modules is designed, and the isolation voltage of the magnetic cores is the working voltage of the LTD modules. A modular solid-state pulse generator based on the multi-turn LTD is developed, which is composed of 10 LTD modules. Each module consists of 18 energy storage capacitors, metal-oxide-semiconductor field-effect transistors and their driving circuits connected in parallel. The pulse generator can output pulses with parameters including a voltage ranging from 0 to 5000 V, a pulse current up to −500 A, and a pulse width ranging from 200 ns to 5 μs. When all modules work in synchronisation, rectangular pulses can be produced with a rise time of 30 ns and a fall time of 16 ns. If all modules are asynchronised, trapezoidal pulses are produced with adjustable step-like rising and falling edges. Moreover, a higher-voltage pulse can be achieved by increasing the number of LTD modules.

Solid-State Marx Generator vs. Linear Transformer Driver: Comparison of Parasitics and Pulse Waveforms for Nanosecond Pulsers

“…In addition, the outer radius has to be chosen large enough, such that the 𝑛 cell switching cells can be placed along the outer circumference of the central structure. The lower boundary is given by (16).…”

“…For fast pulse applications, mainly two topologies based on switching cells have been investigated: Solid-state Marx generators (SSMG) [8]- [11] and linear transformer drivers (LTD) [12]- [14] (also called inductive voltage adder). Depending on the load conditions and the specific pulse specifications, several variants of the two topologies exist [15], [16]. In this paper, the focus is on the generation of unipolar flat-top pulses for resistive loads, as for example stripline kicker magnets in particle accelerator systems [17].…”

All-organic modification coating prepared with large-scale atmospheric-pressure plasma for mitigating surface charge accumulation

“…The solid-state is the main development trend of high-voltage equipment [1][2][3], which gives higher requirements for the electric insulation of polymers. Surface flashover is one of the most common insulation accidents in microwave dielectric windows, solid-state transformers, gas insulation transmission lines, etc [4,5], because the surface flashover voltage is much lower than the bulk breakdown voltage at the same insulation distance [6,7].…”