Millimeter wave microstrip patch antenna for 5G mobile communication

Imran, D.; Farooqi, M. M.; Khattak, Muhammad Irfan; Ullah, Zaka; Khan, Muhammad Irshad; Dar, H.

doi:10.1109/iceet1.2018.8338623

Cited by 94 publications

(40 citation statements)

References 13 publications

Supporting

Mentioning

Contrasting

Unclassified

Order By: Relevance

“…The design is based on an X-slot which is etched from the patch to improve impedance matching. A microstrip feed line is used due to its simple design and easy impedance matching [12]. The microstrip patch antenna array of 4 elements is made using the corporate feeding method.…”

Section: Related Workmentioning

confidence: 99%

See 1 more Smart Citation

High Gain Linear 1x4 X-slotted Microstrip Patch Antenna Array for 5G Mobile Technology

Agarwal¹,

Ahlawat²

2020

JTIT

View full text Add to dashboard Cite

A linear 1×4 antenna array built on the Rogers RT/Duroid 5880 substrate is proposed in this paper to acquire high gain for 5G applications. The proposed design resonates at 38 GHz, i.e. in the Ka-band region, and has small patch dimensions of 5.5×2 mm. The design is simulated using CST studio. The main element consists of X-slot that provides a gain of 6.98 dB with the return loss of –24.25 dB whereas a linear array of 4 elements is made which is fed by the 50Ω m-line using the corporate feeding network which yields a gain of 13.84 dB, as well as the return loss is –15.72 dB. The centreto-centre spacing (d) of elements in the antenna array is 0.8λ

show abstract

Section: Related Workmentioning

confidence: 99%

“…Width of the 50 Ω feed line: Table 2 shows the parameters calculated based on Eqs. (8)- (12), whereas Fig. 3 shows the array design.…”

Section: Antenna Designmentioning

confidence: 99%

High Gain Linear 1x4 X-slotted Microstrip Patch Antenna Array for 5G Mobile Technology

Agarwal¹,

Ahlawat²

2020

JTIT

View full text Add to dashboard Cite

show abstract

“…The devices will be capable of connecting with the server so that user can control them from anywhere. Microstrip Patch Antennas are prominent in terms of size, installation, weight, cost, efficiency, fabrication [7][8][9] and have various usage such as in satellite and mobile communication, radar applications and GPS as well. Since the antenna is to be installed in the mobile devices so it has to be small, hence the design parameters must be chosen efficiently [10,11].…”

Section: Introductionmentioning

confidence: 99%

A Novel Design of Compact 28 GHz Printed Wideband Antenna for 5G Applications

Prachi*¹,

Гупта²,

Vijay³

2020

IJITEE

View full text Add to dashboard Cite

In this antenna study, a compact thin profile wide band patch antenna is introduced for fifth generation. The overall dimensions of this compact antenna is 5 mm x 5.26 mm only, operating in the 28 GHz frequency in Ka-band. Built on the Rogers Rt/Duroid 5880 substrate having thickness of 0.254 mm, the antenna provides 2.1 GHz (27.3-29.2 GHz) of bandwidth at below -10dB reflection coefficient. The novel proposed design is fed by the coaxial feed having inner radii of 0.254 mm. The motive of this study is to improve the bandwidth by utilizing the DGS (Defective Ground Structure) technique and further to procure the high impedance matching, slotting technique is applied on the partial ground plane in which an X shaped slot is engraved resulting a reflection coefficient of -20.03 dB. The proposed antenna provides desirable values of Gain and Directivity of about 5.2 dB and 6.16 dBi respectively. Discrete parameters of designed antenna such as voltage standing wave ratio, radiation patterns, surface current distribution are also evaluated to study antenna characteristics which implies for 5G applications.

show abstract

“…This principle is more suitable for 5G mobile communications. A compact sized doughnut slot MIMO configured antenna will enhance the gain as well as lower ECC (Envelope correlation coefficient) at all frequencies [16][17]. In order to minimize the mutual coupling and boost the separation among the ports, U-slots and the dual polarized radiators plays a pivotal part in the performance of the system [18][19].…”

Section: Introductionmentioning

confidence: 99%

Design and Analysis of High Beam forming MIMO Antenna for 5G Applications

Kumar

Suman

Koteswararao

2020

International Journal of Communications

View full text Add to dashboard Cite

In upcoming days wireless communication products and electronic gadgets are becoming a necessity to human life. Communication systems need antennas that work with multiband and wide band with required parameters like polarization and gain. The main motto of this work is to produce high beam forming with the aid of mutual coupling among the four antenna elements in order to encourage enhanced transit capacity and empower the communication bandwidths at very large data rates for 5G Technology. In the view of mitigating the multipath fading with above mentioned principles. The designed antenna is developed a MIMO patch antenna with wide characteristics. It operates the frequency band from 2.2 GHz to 4.8 GHz. The antenna is developed with FR4 material with a dielectric consistent of 4.4, loss tangent of 0.02 and a density of 1.6mm. The recommended design has 4 monopole antennas. Each monopole antenna has a circular patch with radius of 5mm to avoiding interference. The simulation results s- parameter, VSWR, TARC, ECC, CCL and diversity gain are obtained and verified with the aid of Ansys HFSS and CST studio.

show abstract

Millimeter wave microstrip patch antenna for 5G mobile communication

Cited by 94 publications

References 13 publications

High Gain Linear 1x4 X-slotted Microstrip Patch Antenna Array for 5G Mobile Technology

High Gain Linear 1x4 X-slotted Microstrip Patch Antenna Array for 5G Mobile Technology

A Novel Design of Compact 28 GHz Printed Wideband Antenna for 5G Applications

Design and Analysis of High Beam forming MIMO Antenna for 5G Applications

Contact Info

Product

Resources

About