Media corrosiveness and materials resistance at presence of aggressive carbon dioxide

Abstract

At the present stage of gas field development, the products of many mining facilities have increased content of corrosive CO2 . The corrosive effect of CO2 on steel equipment and pipelines is determined by the conditions of its use. CO2 has a potentially wide range of usage at oil and gas facilities for solving technological problems (during production, transportation, storage, etc.). Simulation tests and analysis were carried out to assess the corrosion effect of CO2 on typical steels (carbon, low-alloy and alloyed) used at field facilities. Gas production facilities demonstrate several corrosion formation zones: lower part of the pipe (when moisture accumulates) and top of the pipe (in case of moisture condensation). The authors have analyzed the main factors influencing the intensity of carbon dioxide corrosion processes at hydrocarbon production with CO2 , its storage and use for various technological purposes. The main mechanism for development of carbon dioxide corrosion is presence/condensation of moisture, which triggers the corrosion process, including the formation of local defects (pits, etc.). X-ray diffraction was used for the analysis of corrosion products formed on the steel surface, which can have different protective characteristics depending on the phase state (amorphous or crystalline).

Structural Diagram of Vibration Protection Means of Building Structures with Moving Loads

“…УДК 621 + 699.8 DOI: 10.22213/2413-1172-2022-4- [27][28][29][30][31][32][33][34][35][36] Структурная схема средств виброзащиты строительных конструкций с подвижными нагрузками * И. А. Пушкарев, кандидат технических наук, ИжГТУ имени М. Т. Калашникова, Ижевск, Россия Рассмотрены способы моделирования процесса выбора методов и средств виброзащиты строительных конструкций с подвижными нагрузками на основе обзора литературы по данной теме. Проведен структурный анализ устройств виброзащиты строительных конструкций.…”

“…и неблагоприятно влиять на функционирование всех остальных элементов здания. Так, например, в статье [34] исследуется коррозионное воздействие углекислого газа на стальное оборудование и трубопроводы в зависимости от условий эксплуатации и наличия влаги.…”