Mechanism of CaF2 under Vacuum Carbothermal Conditions for Recovering Nickel, Iron, and Magnesium from Garnierite

Abstract

Nickel laterite ore is divided into three layers and the garnierite examined in this study belongs to the third layer. Garnierite is characterized by high magnesium and silicon contents. The main contents of garnierite are silicates, and nickel, iron, and magnesium exist in silicates in the form of lattice exchange. Silicate minerals are difficult to destroy so are suitable for smelting using high-temperature pyrometallurgy. To solve the problem of the large amounts of slag produced and the inability to recycle the magnesium in the traditional pyrometallurgical process, we propose a vacuum carbothermal reduction and magnetic separation process to recover nickel, iron, and magnesium from garnierite, and the behavior of the additive CaF2 in the reduction process was investigated. Experiments were conducted under pressures ranging from 10 to 50 Pa with different proportions of CaF2 at different temperatures. The experimental data were obtained by various methods, such as thermogravimetry, differential scanning calorimetry, scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction, and inductively coupled plasma atomic emission spectroscopy. The analysis results indicate that CaF2 directly reacted with Mg2SiO4, MgSiO3, Ni2SiO4, and Fe2SiO4, which were isolated from the bearing minerals, to produce low-melting-point compounds (FeF2, MgF2, NiF2, etc.) at 1315 and 1400 K. This promoted the conversion of the raw materials from a solid–solid reaction to a liquid–liquid reaction, accelerating the mass transfer and the heat transfer of Fe–Ni particles, and formed Si–Ni–Fe alloy particles with diameters of approximately of 20 mm. The smelting materials appeared stratified, hindering the reduction of magnesium. The results of the experiments indicate that at 1723 K, the molar ratio of ore/C was 1:1.2, the addition of CaF2 was 3%, the recovery of Fe and Ni reached 82.97% and 98.21% in the vacuum carbothermal reduction–magnetic separation process, respectively, and the enrichment ratios of Fe and Ni were maximized, reaching 3.18 and 9.35, respectively.

From Silica Leachate of Laterite Nickel Ore to Silicate Cathode Material: Preparation of Li2MnSiO4/C as Lithium- ion Battery Cathode Material by Two -Stage Roasting Method

“…Laterite nickel resources are rich, there are 41 million tons of nickel metal in the world, the exploration cost is low, the mining cost is very low. Laterite nickel ore is famous for its rich nickel content, whether it is domestic or international, researchers have focused on nickel and iron cobalt magnesium and other elements [19]− [22] , but it ignored the highest concentration of Si.Reasonable separation of each element and its application to their respective elds is an effective measure in line with the development of resources and environment and the full utilization of resources.…”