Mechanical Properties of 6061 Aluminum Alloy under Cyclic Tensile Loading

Abstract

During the service process of an aluminum alloy structure, its complex deformation zone experiences repeated loading problems such as repeated tension, compression, bending and reverse bending. At the same time, the cyclic loading and heat treatment process also have a certain impact on the mechanical properties of aluminum alloy extruded tubes. Therefore, the study of heat treatment process parameters has important engineering and practical value for the mechanical properties of aluminum alloy extrusion tubes under cyclic loading conditions. The experiment takes 6061-T6 aluminum alloy extruded tubes as the research objects. In the study, heat treatment and cyclic tensile tests were carried out on 26 aluminum alloy specimens to study the effects of different heat treatment parameters (such as heating temperature, holding time, and cooling method) on the stress–strain hysteresis curves, stress characteristics, hysteretic energy, skeleton curves and failure characteristics of the alloy under the same loading system. In addition, different cyclic tensile tests were carried out on 20 aluminum alloy samples without secondary heat treatment to discuss the effects of different cyclic loading regimes on the mechanical properties of the alloy. The research results indicate that the effect of heating temperature on the cyclic loading performance of the alloy is greater than that of the holding time, and the effect of the cooling method on the cyclic loading performance of the alloy is not obvious. A cyclic tensile loading regime has a significant impact on the strength, elongation and hysteresis energy of the alloy. The hysteretic behavior of the alloy during cyclic tensile loading depends on the applied stress level and loading history. As the number of cycles increases, the shape of the hysteresis curve tends to be stable, but there is no monotonic relationship between the number of cycles loaded and the hysteresis energy.