Mapping the Mechanical Properties of Hierarchical Supercrystalline Ceramic-Organic Nanocomposites

Abstract

Multiscale ceramic-organic supercrystalline nanocomposites with two levels of hierarchy have been developed via self-assembly with tailored content of the organic phase. These nanocomposites consist of organically functionalized ceramic nanoparticles forming supercrystalline micron-sized grains, which are in turn embedded in an organic-rich matrix. By applying an additional heat treatment step at mild temperatures (250–350 °C), the mechanical properties of the hierarchical nanocomposites are here enhanced. The heat treatment leads to partial removal and crosslinking of the organic phase, minimizing the volume occupied by the nanocomposites’ soft phase and triggering the formation of covalent bonds through the organic ligands interfacing the ceramic nanoparticles. Elastic modulus and hardness up to 45 and 2.5 GPa are attained, while the hierarchical microstructure is preserved. The presence of an organic phase between the supercrystalline grains provides a toughening effect, by curbing indentation-induced cracks. A mapping of the nanocomposites’ mechanical properties reveals the presence of multiple microstructural features and how they evolve with heat treatment temperature. A comparison with non-hierarchical, homogeneous supercrystalline nanocomposites with lower organic content confirms how the hierarchy-inducing organic excess results in toughening, while maintaining the beneficial effects of crosslinking on the materials’ stiffness and hardness.

Little Adjustments Significantly Simplify the Gram-Scale Synthesis of High-Quality Iron Oxide Nanocubes

“…Due to their size- and shape-dependent magnetic properties, they can be applied as, for example, T 1 -/T 2 -contrast agents in magnetic resonance imaging (MRI), − tracers in magnetic particle imaging, targeted and image-guided drug delivery, and separation of cells and biological material . Recently, spherical magnetite nanoparticles were also used in material engineering to form highly ordered, supercrystalline organic–inorganic composite materials with exceptional mechanical properties. − …”

Tunable Microwave Dielectric Properties of Ca0.6La0.8/3TiO3 and Ca0.8Sm0.4/3TiO3-Modified (Mg0.6Zn0.4)0.95Ni0.05TiO3 Ceramics with a Near-Zero Temperature Coefficient

“…Therefore, the utilization of dielectric ceramics with high permittivity (ε r ) and low dielectric loss has attracted more and more attention. In industrial applications, dielectric materials require the consideration of three parameters: an applicable relative permittivity (ε r ), a high-quality factor (Q f ), and a near-zero temperature coefficient of resonance frequency (τ f ) [ 1 , 2 , 3 , 4 , 5 , 6 , 7 ]. Dielectric materials satisfied with these conditions demonstrated a reduction in component size and dielectric loss; conversely, the component characteristics are not affected by external temperature changes [ 8 , 9 , 10 ].…”

A Study of the Effect of Sintering Conditions of Mg0.95Ni0.05Ti3 on Its Physical and Dielectric Properties

“…Therefore, to be able to effectively reduce the size and improve the performance of components, quite a few laboratories place their attention on electronic ceramics. In the field of microwave (MW) dielectrics applications [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 ], electronic ceramics are subject to the following conditions:…”