Major Ion Chemistry and Groundwater Quality Evaluation for Irrigation

Abstract

Hydrogeochemical characteristics of Groundwater analyzed in the study area of Coimbatore district by collecting 60 samples from agricultural belt. Groundwater quality for irrigation is determined by several key factors like pH, Electrical conductivity (EC), Total suspended solids (TDS). The cations such as Sodium (Na+), Potassium (K+), Calcium (Ca2+), Magnesium (Mg2+ ) and anions are Hydrocarbon (HCO3), Carbonate (CO3 -), Chlorides (Cl-)and Sulphates (SO4 2-) are tested. The irrigation water quality parameters such as Residual Sodium Carbonate (RSC), Sodium Absorption Ratio (SAR), Chloro Alkali Indices (CA I & CAII), Kelley’s Ratio (KR), Magnesium Hazard (MH), Percent sodium (%Na) and Permeability Index (PI), Soluble sodium Percent (SSP) are computed from the key factors, anions and cations. From the USSL Diagram the samples fall in C2S1, C3S1, C4S1 range. Salinity hazard is too elevated in the study area, all the samples are categorized under high to very high with the values greater than 750 μS/cm. Total dissolved solid in the study area indicated that only 2 locations are unfit for irrigation. SAR and % Na shows that there is no hazard related to irrigation watering. Magnesium hazard in the groundwater is high and indicates 51 sample out of 60 is unsuitable for irrigation. From the study it indicates the groundwater is contaminated with salt content and in most of the area it can be used for irrigation.
 Keywords: Groundwater, Irrigation water quality, Salinity hazard, Kelley’s ratio, Magnesium hazard