LPF/dual-BPF/UWB-BPF reconfiguration utilizing DGS resonators and lumped capacitors

Abstract

In this work, three successive filter models based on defected ground structure (DGS) techniques are designed, fabricated, and tested to be utilized for different wireless applications. The filters are printed on a RO5880 substrate of an overall size of 22 × 11 × 0.8 mm3. Three DGSs are etched from the ground plane to achieve the suggested band stop features for all frequencies above 10 GHz. The first model is a low-pass filter that succeeded to pass all frequencies below 10 GHz, the second model is a bandpass filter that operated at 4.5 and 9 GHz after using a pair of interdigital capacitors, and the third model covered all ultra-wideband frequency range when a pair of lumped capacitors is utilized instead of the interdigital capacitors. Good consistency between simulated and measured outcomes is achieved for each of the three filters confirming their suitability to be embedded in small-sized wireless devices.