Liquid Metal Patterning and Unique Properties for Next‐Generation Soft Electronics

Abstract

Room-temperature liquid metal (LM)-based electronics is expected to bring advancements in future soft electronics owing to its conductivity, conformability, stretchability, and biocompatibility. However, various difficulties arise when patterning LM because of its rheological features such as fluidity and surface tension. Numerous attempts are made to overcome these difficulties, resulting in various LM-patterning methods. An appropriate choice of patterning method based on comprehensive understanding is necessary to fully utilize the unique properties. Therefore, the authors aim to provide thorough knowledge about patterning methods and unique properties for LM-based future soft electronics. First, essential considerations for LM-patterning are investigated. Then, LM-patterning methods-serial-patterning, parallel-patterning, intermetallic bond-assisted patterning, and molding/microfluidic injection-are categorized and investigated. Finally, perspectives on LM-based soft electronics with unique properties are provided. They include outstanding features of LM such as conformability, biocompatibility, permeability, restorability, and recyclability. Also, they include perspectives on future LM-based soft electronics in various areas such as radio frequency electronics, soft robots, and heterogeneous catalyst. LM-based soft devices are expected to permeate the daily lives if patterning methods and the aforementioned features are analyzed and utilized.

Recent advances in the material design for intelligent wearable devices

“…Recently, liquid metals have received widespread attention in the sensing field due to their unique mechanical, electrical, thermal and optical properties. [118][119][120][121][122] Compared to other soft or conductive materials, liquid metals can make electronics more accessible to the tissues, human body and clothing while maintaining mechanical flexibility. Kim et al reported a freestanding patterned liquid metal thin-film conductor (FS-GaIn).…”

A review on thermal and electrical behaviours of liquid metal-based polymer composites

“…In recent years, a great deal of research has been devoted to improving the printability characteristics of LMPCs. 130–134 The printability can be enhanced by diluting a concentration of conductive ink with a volatile solvent. However, this process prolongs the circuit fabrication cycle.…”

Rational Design of Conductive Pathways in Flexible Tactile Sensors via Indirect 3D-Printing of Liquid Metal for High-Precision Monitoring and Recognition

“…As for the direct 3D printing of microchannels or LM into a liquid flexible substrate before curing, limitations still exist in the selection of materials, and typically the sensors prepared are less flexible . Besides, applying liquid state LM conductor, other quasi-solid state LM conductor fabrication methods including direct 2D/3D printing of LM embedded elastomer is an important method to fabricate LM filled microchannel sensor. − …”