Life cycle assessment of cost-optimized buttress earth-retaining walls: A parametric study

Abstract

In this paper life cycle assessments are carried out on 30 optimized earth-retaining walls of various heights (4-13 m) and involving different permissible soil stresses (0.2, 0.3 and 0.4 MPa) in Spain. Firstly, the environmental impacts considered in the assessment method developed by the Leiden University (CML 2001) are analyzed for each case, demonstrating the influence of the wall height and permissible soil stress. Secondly, this paper evaluates the contribution range of each element to each impact. The elements considered are: concrete, landfill, machinery, formwork, steel, and transport. Moreover, the influence of the wall height on the contribution of each element over the total impact is studied. This paper then provides the impact factors per unit of concrete, steel, and formwork. These values enable designers to quickly evaluate impacts from available measurements. Finally, the influence of steel recycling on the environmental impacts is highlighted. Findings indicate that concrete is the biggest contributor to all impact categories, especially the global warming potential. However, the steel doubles its contribution when the wall heights increase from 4 m to 13 m. Results show that recycling rates affect impacts differently.

Life-Cycle Assessment: A Comparison between Two Optimal Post-Tensioned Concrete Box-Girder Road Bridges

“…Nevertheless, the separation of steel into different production methods allows direct control of the ratio of steel obtained by each production method and indirect control of the recycled steel ratio, which can differ depending on the area considered such as in Zastrow et al [32]. In addition, as well as the concrete, the distance and mode of its transportation can be controlled more exactly.…”

A Review of Multi-Criteria Decision-Making Methods Applied to the Sustainable Bridge Design

“…The sustainable development of bridges is mainly based on meeting the three pillars of sustainability-economic, social and environmental factors-which each have different goals. The economic and environmental factors have been widely studied, and even, in some cases, a specific software has been developed to assess the environmental impacts of some structures [1]. Despite the fact that some authors have carried out studies to evaluate social sustainability throughout the life-cycle of an infrastructure [2,3], there is still limited knowledge on social factors affecting structures' sustainability, including bridges.…”

Sustainable Concrete Performance—CO2-Emission

“…The simplicity of the tool and four complex concrete characteristics respond to the needs indicated by other authors [35,38]. Previous analysis was conducted by measuring only two or three aspects (such as cost/benefit or ecological/benefit ratio) [24,[30][31][32][33][34].…”

“…For the specific location discount rate, electricity and fuel prices may vary [23]. The main influence of uncertainty on the results is the variation of several impacts due to technological correlation among production plants (mostly energy mixes of manufacturing processes) [24].…”