Lattice Boltzmann numerical simulation and experimental research of dynamic flow in an expansion-contraction microchannel

Abstract

This paper applies the lattice Boltzmann method (LBM) to a 3D simulation of micro flows in an expansion-contraction microchannel. We investigate the flow field under various inlet flow rates and cavity structures, and then systematically study the flow features of the vortex and Dean flow in this channel. Vortex formation analysis demonstrates that there is no observable vortex generated when the inlet flow rate is low enough. As the inlet flow rate increases, a small vortex first appears near the inlet, and then this vortex region will keep expanding until it fully occupies the cavity. A smaller cavity width may result in a larger vortex but the vortex is less influenced by cavity length. The Dean flow features at the outlet become more apparent with increasing inlet flow rate and more recirculation regions can be observed in the cross-section under over high inlet flow rate. In order to support the simulation results, some experimental processes are conducted successfully. It validates that the applied model can accurately characterize the flow in the microchannel. Results of simulations and experiments in this paper provide insights into the design and operation of microfluidic systems for particle/cell manipulation.

Inertial Multi‐Force Deformability Cytometry for High‐Throughput, High‐Accuracy, and High‐Applicability Tumor Cell Mechanotyping

“…[30] The specific principle could be seen in these previous works. [31][32][33] In the numerical simulation of cell deformation, the water phase with a density of 1000 kg m −3 and the dynamic viscosity of 0.001 pa s was used to simulate the sample suspension, and the incompressible neo-Hookean hyperelastic solid was used to simulate the cells. The fluid-solid interaction model was discretized and solved by the COMSOL multiphysics 5.6.…”

High-throughput rare cell separation from blood samples using steric hindrance and inertial microfluidics

“…35 Furthermore, size-based particle/cell separation in a multiorifice microchannel is also driven by a secondary flow. 34,36,37 As a consequence of a series of alternating narrow (contracting) and wide (expanding) channel geometries, a unique vortex will arise under low Re c at the corners of the expansion channels. Interestingly, the presence of vortexes in an orifice channel is slightly different from that in the straight channel generated by high Re c , 38 and vastly different from that of the Dean vortex created in a curved channel at low Re c (ref.…”

Hydrodynamic Trapping of Particles in an Expansion-Contraction Microfluidic Device

“…The microvortex generated in sudden expansion is of great importance for particle manipulation. Researchers have gained some beneficial research results [9][10][11] in the theoretical analysis and experimental investigations on the formation of vortices in different microchannel configurations. Jiang et al [9] numerically investigated the flow field under various inlet flow rates and cavity structures and then systematically studied the flow features of the vortex and Dean flow in this channel by LBM.…”

“…Researchers have gained some beneficial research results [9][10][11] in the theoretical analysis and experimental investigations on the formation of vortices in different microchannel configurations. Jiang et al [9] numerically investigated the flow field under various inlet flow rates and cavity structures and then systematically studied the flow features of the vortex and Dean flow in this channel by LBM. Bȃlan et al [10] investigated the dynamics of the vortices generated in the vicinity of Yand T-microbifurcations with one occluded branch.…”