Irradiance formations in hollow straight light pipes with square and circular shapes

Abstract

We investigated, both analytically and numerically, the irradiance formation of an asymmetrically located Lambertian light source in hollow straight light pipes with square and circular shapes. The uniform irradiance distribution in a square light pipe and hot-spot localization in a circular light pipe were examined and determined semianalytically. Typical factors of influence, such as light-pipe length, width, and source size, were identified with extensive simulation. When the ratio of light-pipe length and width was less than 0.5, the deviation from uniformity could be more than 20%. But once the source size was large enough (approximately half of the incident port), such that the Lambertian characteristics of the source dominated the irradiance distribution, the uniformity deviation was reduced. Furthermore, a quantity of root-mean-square circular differences was defined in order to identify the shape deformation of the light pipe; it was found that the peak value of the hot spot decreased exponentially with the deformation scale. The influence of nonperfect reflectivity of the pipe wall on irradiance formation was also examined for a square light pipe; when the reflectivity is larger than 90%, the difference in uniformity is less than 10% and uniform irradiance remains, provided that the ratio of light-pipe length and width is larger than 1; even the source is located asymmetrically.

Numerical evaluation of the light transport properties of alternative He-3 neutron detectors using ceramic scintillators

“…When a spot light source is located at one end on the longitudinal center axis of a cylindrical light pipe, the spatial profile of the light output at the other end has a peak at the center axis while a square light pipe has nearly a flat spatial profile. It had been confirmed theoretically and experimentally [13,14]. This difference in the light transport property between the cylindrical and square tube is considered to cause the difference in the number of the reflection on the surface of the scintillator.…”

Freeform microstructure linear light emitter design for a natural light illumination system

“…Since the light is transmitted to the output from all units, we do not get collimated light at the output of the light collector. To transmit light in the interior, optical fiber or a light pipe is used [10,11]. For our previous research, we used optical fiber as a light transmission media.…”

Recent advances in mixing rods

“…There have been some recent articles that help to quantify the performance of straight mixers [24][25] [26].…”