Investigations of the Mechanism of Gold Nanoparticle Stability and Surface Functionalization in Capillary Electrophoresis

Abstract

Covalently functionalized gold nanoparticles influence capillary electrophoresis separations of neurotransmitters in a concentration and surface chemistry-dependent manner. Gold nanoparticles with either primarily covalently functionalized carboxylic acid (Au@COOH) or amine (Au@NH 2 ) surface groups are characterized using extinction spectroscopy, transmission electron microscopy, and zeta potential measurements. The impact the presence of nanoparticles and their surface chemistry is investigated, and at least three nanoparticle-specific mechanisms are found to effect separations. First, the degree of nanoparticle-nanoparticle interactions is quantified using a new parameter termed the critical nanoparticle concentration (CNC). CNC is defined as the lowest concentration of nanoparticles that induces predominant nanoparticle aggregation under specific buffer conditions and is determined using dual-wavelength photodiode array detection. Once the CNC has been exceeded, reproducible separations are no longer observed. Second, nanoparticleanalyte interactions are dictated by electrostatic interactions which depend on the pK a of the analyte and surface charge of the nanoparticle. Finally, nanoparticle-capillary interactions occur in a surface chemistry dependent manner. Run buffer viscosity is influenced by the formation of a nanoparticle steady-state pseudo-stationary phase along the capillary wall. Despite differences in buffer viscosity leading to changes in neurotransmitter mobilities, no significant changes in electroosmotic flow were observed. As a result of these three nanoparticle-specific interactions, Au@NH 2 nanoparticles increase the mobility of the neurotransmitters while a smaller opposite effect is observed for Au@COOH nanoparticles. Understanding nanoparticle behavior in the presence of an electric field will have significant impacts in separation science where nanoparticles can serve to improve either the mobility or detection sensitivity of target molecules.

Multilayer assemblies of polyelectrolyte–gold nanoparticles for the electrocatalytic oxidation and detection of arsenic(III)

“…S1) confirmed a monodisperse size of 9.6 nm with a standard deviation r = 0.85 nm. Zeta potential measurements revealed the nanoparticles highly stable and have a surface charge of À40.2 ± 0.9 mV at pH 9.4, in complete agreement with literature data [37,38]. Upon decreasing the pH, the zeta potential remained almost constant down to pH 6.…”

Novel route synthesis of porous and solid gold nanoparticles for investigating their comparative performance as contrast agent in computed tomography scan and effect on liver and kidney function

“…30 The zeta potential of PGNPs and SGNPs was -44.4 mV and -51 mV, which indicates excellent colloidal stability for both formulations. 31,32 The colloidal stability of these GNPs was further evaluated in different physiological media after 1 week. We found negligible change in nanoparticles size dispersed in water, phosphate-buffered saline solution, and Dulbecco's Modified Eagle's Medium indicating that nanoparticles are suitable for long-term use.…”

Graphene oxide bonded fused‐silica fiber for solid‐phase microextraction‐gas chromatography of polycyclic aromatic hydrocarbons in water

“…It has extensive applications in food [3,4], environment [5], biochemistry [6,7] and medicine [8] and it has been coupled with many analytical technologies, such as GC [9], HPLC [10,11], CE [12], UV [13,14] and MS [15]. The core part of the SPME technique is the coating, a stationary phase that adsorbs the analytes from varied samples.…”