Investigation of ramped voltage stress to screen defective magnetic tunnel junctions

Abstract

A ramped voltage stress (RVS) method to screen defective magnetic tunnel junctions (MTJs) is investigated in order to improve screen accuracy and shorten test time. Approximately 1500 MTJs with 1.25 nm thick tunnel barriers were fabricated for this evaluation, and normal MTJs show a 189% tunnel magnetoresistance ratio, a 365 Ω μm 2 resistance-area product, and a 1.8 V breakdown voltage, which is enough for applying reliable screen tests. We successfully classified MTJs as normal MTJs having good characteristics or defective MTJs having insufficient endurance and showing resistance degradation after only short-term cycling. Using the RVS screen test with low ramp speed, it is demonstrated that remarkable screening performance and little dependence on temperature are obtained for short test time.

Optimal dummy word line condition to suppress hot carrier injection phenomenon due to the natural local self-boosting effect in 3D NAND flash memory

“…However, when Δt is between 10 and 100 s, the channel potential of WL 8 decreases, which shows that the potential of the other WLs rises because of the charge sharing effect. 24) Furthermore, as Δt increases, the DCP is recovered and the channel potential of the selected WL is increased. Therefore, as shown in Fig.…”

The Damage Deterioration Mechanism of Tunnel Structure under the Effect of Thermo-Mechanical Coupling and Its Maintenance

“…Tunnel projects are facing more engineering challenges as the tunnels are becoming longer, bigger, deeper, and clustered these days [1][2][3][4][5][6][7][8][9]. Under the condition of high ground temperature, the stress on tunnel support structure and surrounding rock is even more complex under the multiple and simultaneous actions of temperature, stress, internal water pressure, and ground stress, etc.…”