Investigation of mineral commodity residues based on alkalinity, solubility and other physicochemical aspects aiming the management of amazonian acidic soils

Santos, L. G. S.; Angélica, Rômulo Simões; Paz, Simone Patrícia Aranha da

doi:10.1016/j.jenvman.2023.117558

Cited by 1 publication

(1 citation statement)

References 44 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The following analysis conditions were used: voltage of 40 kV, current of 35 mA, step size of 0.0263° in 2θ, 2θ scan range of 3.0072° to 94.9979°, scan speed of 30 .6 s/step, 1/4° slit angle, 1/2° anti-scattering slit and 10 mm beam mask. The phases were identified using the PANalytical X'Pert High Score software version 3.0., SANTOS et al [46].…”

Section: Análise De Difratometria De Raios-x (Drx)mentioning

confidence: 99%

Thermochemical Transformation of Municipal Household Solid Waste Fractions into Bio-Oils and Bio-Adsorbents

Borges,

Assunção,

Pereira

et al. 2024

Preprint

View full text Add to dashboard Cite

This work aims to investigate the effect of process temperature and catalyst content by thermochemical degradation of municipal solid waste (MSW) fraction (organic matter + paper + plastic) on the yield of reaction products (bio-oil, biochar, H2O and gas), physicochemical properties and chemical composition of bio-oils, as well as on the morphology and crystalline phases of biochar in laboratory scale. The organic matter, paper and plastic segregated from the gravimetric composition of total waste sample were subjected to the pre-treatments of drying, crushing and sieving. The experiments were carried out at 400, 450 and 475 °C and 1.0 atmosphere, and at 450 °C and 1.0 at-mosphere, using 5.0, 10.0 and 15.0% (wt.) of FCC zeolite, bath mode, using a laborato-ry scale glass reactor. The bio-oil was characterized for acidic value. The chemical functions present in the bio-oil identified by FT-IR and the composition by GC-MS. Biochar was characterized by SEM/EDS and XRD. Thermal pyrolysis of the MSW frac-tion (organic matter + paper + plastic) shows bio-oil yields between 9.44 and 9.24% (wt.), aqueous phase yields between 21.93 and 18.78% (wt.), solid phase yields between 67.97 and 40.34% (wt.) and gas yields between 28.27 and 5.92% (wt.). The yield of bio-oil decreases with increasing process temperature. For the experiments using FCC, the biochar and gas yields increase slightly with the FCC content, while that of bio-oil de-creases and the H2O phase remains constant. The GC-MS of bio-oils identified the presence of hydrocarbons and oxygenates, as well as nitrogen-containing compounds, including amides and amines. The acidity of the bio-oil increased with increasing temperature and with the aid of FCC as a catalyst. It has been identified the presence of hydrocarbons within bio-oil by addition of FCC catalyst due to the deoxygenation of carboxylic acids, followed by decarboxylation and decarbonylation reactions, producing aliphatic and aromatic hy-drocarbons.

show abstract

Section: Análise De Difratometria De Raios-x (Drx)mentioning

confidence: 99%