Investigating mechanical, thermal, and flammability properties of thermoplastic polyurethane/carbon nanotube composites

Abstract

Thermoplastic polyurethane (TPU) composites containing carbon nanotube (CNT) with the loading ratios from 0.5wt% to 2 wt% were prepared using melt-compounding process. Surfaces of the CNT particles were treated with sulfuric acid/nitric acid to purify CNT and to achieve compatible surface characteristics between TPU matrix and CNT. Mechanical, thermal, flame retardant, melt flow, and morphological properties of TPU/CNT composites were investigated. Addition of CNT to TPU matrix causes in a prominent increase in tensile strength, percentage of elongation at break, and tensile modulus values of TPU. The mechanical properties are improved for lower modified CNT loadings. CNT inclusions also improve the thermal stability of pristine TPU. Addition of CNT into TPU matrix causes increase in melting and decomposition temperatures of TPU and decrease in glass transition temperature. The flammability parameters of TPU also shift to higher values after CNT loadings to matrix. Modified CNT additions at higher concentrations exhibit better fire performance. Additions of modified CNT and pristine CNT show different trends in the case of melt flow rate values. Modified CNTs disperse more homogeneously relative to pristine ones into TPU matrix which is due to improvement in interfacial interactions between CNT and TPU.

Development of multifunctional polyurethane elastomer composites containing fullerene: Mechanical, damping, thermal, and flammability behaviors

“…The black color of C 60 is the main reason for this observation which leads to increase in absorption of radiant heat within the top layer of the material. 52,53 Similar observations were reported when the other carbonaceous materials were used as flame retardant additives including carbon nanotube, 54 expandable graphite, 55 and carbon fiber 56 in our previous studies and graphene nanosheets, 57 and carbon nanofiber 58 in the literature, additionally. The earlier initiation of thermal degradation of TPU occurs thanks to the higher heat absorption.…”

Grafting Poly(Methyl Methacrylate) (PMMA) from Cork via Atom Transfer Radical Polymerization (ATRP) towards Higher Quality of Three-Dimensional (3D) Printed PMMA/Cork-g-PMMA Materials

“…Normally, the addition of a filler to polymeric matrices limits their free mobility, increasing the material’s apparent viscosity. Actually, the effect of fillers on the reduction of MFI has been reported by several authors [ 42 , 43 , 44 ]. However, the addition of C- g -PMMA content only caused a slight reduction in the MFI to 6.2 g·10 min −1 (a reduction around 7%), which can be associated with the better compatibility between the filler and the matrix.…”

A study on the effect of carbon nanotube surface modification on mechanical and thermal properties of CNT/HDPE nanocomposite

“…29 Kanbur and Tayfun showed that the addition of CNT in polyurethane with the loading from 0.5 wt% to 2 wt% causes to enhance in tensile strength, percentage of elongation at break, and tensile modulus values of polyurethane. 30…”