Interface Reliability Assessments for Copper/Low-k Products

Abstract

Multiple new materials are being adopted by the semiconductor industry at a rapid rate for both semiconductor devices and packages. These advances are driving significant investigation into the impact of these materials on device and package reliability. Active investigation is focused on the impact of back-end-of-line (BEOL) processing on Cu/low-k reliability. This paper discusses Cu/low-k BEOL interfacial reliability issues and relates key items from the assembly process and packaging viewpoint that should be managed in order to prevent adverse assembly impact on BEOL interfacial reliability. Reliability failure mechanisms discussed include interface diffusion-controlled events such as the well-known example of Cu electromigration (EM), as well as stress-migration voiding. Interface defectivity impact on dielectric breakdown and leakage is discussed. Lastly, assessments of assembly impact on these Cu/low-k interfacial concerns are highlighted.

Adhesion Investigation Between Metal and Benzocyclobutene (BCB) Polymer Dielectric Materials in 3-D Integration Applications

“…From the experimental results, since the thermal expansion coefficients of different materials induce the interfacial stress mismatch between different layers, layer stacking order can affect the interfacial adhesion strength significantly. A welldesigned layer stacking order for a multilayer structure can minimize the extrinsic stress of mismatch, which can further increase the interfacial adhesion strength [23].…”

Externally constrained plastic flow in miniaturized metallic structures: A continuum-based approach to thin films, lines, and joints

“…Although the numerical analysis is continuum-based, this observation nevertheless implies the concentration of crystal defects, namely dislocations and vacancies, near these locations and can promote subsequent void nucleation and electromigration damages. Experiments have shown that the interface between Cu and the adjacent barrier layers is an easy diffusion path and is particular prone to failure initiation [234,[289][290][291][292][293]. The adhesion quality of the interface in actual devices plays a very important role.…”

Mixed-mode interfacial adhesive strength of a thin film on an anisotropic substrate

“…These methods are limited by the intricate sample preparation and the bonding process, which can cause undesirable compositional changes in many films. Moreover, in some thin film systems, it is difficult to introduce a pre-crack and grow the crack in a controlled manner along the interface of interest (Hartfield et al, 2004).…”