Integrity Management of Offshore Structures With Emphasis on Design for Structural Damage Tolerance

Abstract

Based on relevant accident experiences with oil and gas platforms, structural integrity management of offshore structures is briefly outlined, including adequate design criteria, fabrication and operational procedures, as well as life cycle quality assurance and control. The focus is on developing an operational design standard for accidental collapse limit states to ensure robustness or damage tolerance. The focus is to ensure an acceptable safety level against progressive failure leading to total loss in view of initial damage caused by accidental actions due to operational errors and abnormal structural damage due to fabrication errors and abnormal deterioration during operation as well as the actions on the damaged structure and inherent uncertainties. Moreover, the damage tolerance required for achieving safety by inspection, monitoring and repair strategies, is briefly addressed. While the basic damage tolerance requirement refers to the survival of the structure in certain damage conditions, wider aspects of robustness in terms of the structure’s sensitivity to the deviation of action effects and resistances from normal conditions are also briefly addressed. In particular, it is suggested to provide robustness in cases where the structural performance is sensitive to uncertain parameters, by choosing conservative values of these parameters.

Exploring Autonomous and Remotely Operated Vehicles in Offshore Structure Inspections

“…By considering the probability, consequences, and cost of operational or maintenance activities, risk-based inspection frameworks enable optimal selection and prioritisation of inspection and maintenance activities [10]. These frameworks use structural reliability methods and Bayesian reliability methods to establish fatigue design criteria and update inspection plans during operation [31]. RBI involves prioritising inspections based on the level of risk associated with each subsea asset, thus reducing the need for systematic periodic inspections where they are unnecessary.…”

Dropped Object Impact Analysis Considering Frequency and Consequence for LNG-FPSO Topside Module

“…The true strain and stress relation was utilized to simulate a plate punching experiment until fracture using the finite element model (FEM). Similarly, Storheim and Amdahl [20] surveyed the effect of various features of the complete stress-strain curve on the predicted outcome of a collision simulation. Nonlinear finite element analysis simulations of a full-scale impact scenario revealed that the slope of the stress-strain curve determined how strains localized, and thereby when and where fracture propagated.…”

The assessment of impact damage caused by dropped objects on floating offshore structures

“…Moan 34 described the structural integrity management of oil and gas platforms such as operational procedures, fabrication quality, design criteria, quality assurance in accordance with various accident events with offshore structures. The attention was paid to development of an operational design standard for ALS to make sure the damage tolerance and robustness.…”