Infill parameters influence over the natural frequencies of ABS specimens obtained by extrusion-based 3D printing

Abstract

Purpose The mechanical performances of 3D-printed parts are influenced by the manufacturing variables. Many studies experimentally evaluate the impact of the process parameters on specimens’ static and dynamic behavior with the aim of tailoring the mechanical response of the prints. However, this experimental approach is hampered by the very large number of parameters, 3D printers and materials, the development of computer simulation models being thus required. In the context, this study aims to fill a gap by experimentally investigating the influence of infill related parameters over the vibrations of 3D-printed specimens, as well as to propose and validate a parametric finite element (FE) model for the prediction of eigenfrequencies. Design/methodology/approach A generally applicable FE model is not yet available for the 3D printing technology based on the material extrusion process due to the large number of parameters settings that determine a large variability of outcomes. Hence, the idea of developing numerical simulation models that address sets of parameters and assess their impact on a certain mechanical property. For the natural frequency, the influence of the infill density and infill line width is studied in this paper. An FE script that automates the generation of the model geometry by using the considered set of parameters is developed and run. The results of the modal analysis are compared to the experimental values for validating the script. Findings Based on the experimental results, a linear regression between the weight of the part and the first natural frequency is established. The response surfaces indicate that the infill density is the most significant parameter of influence. The weight-frequency function is then used for the prediction of the natural frequency of specimens manufactured with other infill parameters and values, including different infill patterns. Practical implications As the malfunctions or mechanical damages can be caused by the resonant vibration of parts during use, this research develops a FE-parameterized model that evaluates and predicts the eigenfrequencies of 2D printed parts to prevent these undesirable events. The targeted functional applications are those in which 3D-printed polymer parts are used, such as drone arms or drone propellers. Originality/value This research studies the influence of process parameters on the natural frequency of 3D-printed polylactic acid specimens, a topic scarcely addressed in literature. It also proposes a new approach for the development of parameterized FE models for sets of parameters, instead of a general model, to reduce the time and resources allocated to the experimental tests. Such a model is provided in this paper for evaluating the influence of infill parameters on 3D prints eigenfrequency. The numerical model is validated for other infill settings.

A Combined Experimental and Modeling Study for Pellet-Fed Extrusion-Based Additive Manufacturing to Evaluate the Impact of the Melting Efficiency

“…Most polymeric AM applications start with a filament [9][10][11][12], which is forced through a heated nozzle, promoting its melting to then deposit consecutive material layers. This is performed according to geometric and process parameters that can have a strong influence on the properties of the final parts [13][14][15][16]. In recent years, however, a growing number of AM applications introduced the use of single-screw extruders (SSEs) fed with polymer pellets [17][18][19][20][21].…”

Preliminary Study on Mechanical Aspects of 3D-Printed PLA-TPU Composites

“…In many cases, PLA modification is made by copolymerization, surface treatment, or stereocomplexation. The mixture drastically changes the properties and degradation patterns of the intrinsic polymer and thus affects its adaptability to different end-use applications [ 8 , 9 , 10 , 11 , 12 , 13 , 14 ]. Since these fibers are of a hollow and lignocellulosic nature, they have very good thermal and acoustic insulation properties.…”

Investigation of the Effect of Taper Angle and Boundary Condition on Natural Frequency of the 3d Printed Pet-G Beams

“…Son olarak Parpala vd. de [27] doluluk ayarlarının üç boyutlu baskı ile üretilen PLA numunelerin doğal frekanslarına etkilerini incelediği çalışmada, doluluk oranının kontur sayısı ve doluluk deseni ile kıyaslandığında, doğal frekans değerlerini etkileyen en önemli parametre olduğunu rapor etmiştir. Bu çalışma kapsamında, EYM ile PET-G malzemeden üretilen konik açılı kirişlerde, konik açısının ve sınır koşullarının ilgili kirişlerin doğal frekans değerlerine etkileri deneysel olarak incelenmiştir.…”