In-situ synchrotron X-ray tomography investigation of the imperfect smooth-shell cylinder structure

In-situ X-ray tomography on permeability evolution of C/SiC porous ceramic for hypersonic vehicles

“…High-resolution BL13W1 is an X-ray imaging beamline at Shanghai Synchrotron Radiation Facility (SSRF, China) with an optimized 3.5 GeV electron storage ring [30][31][32] . It can devote to various scienti c elds [33][34][35][36][37] , including advanced material and structural characterization due to its unique advantages of high brightness, high purity and high collimation [38][39][40] over traditional laboratory X-ray machine. Figure 3 shows the schematics of in-situ testing system compatible with the BL13W1 of the SSRF.…”

Machine-Learning-Aided Prediction of Flexural Strength and ASR Expansion for Waste Glass Cementitious Composite

“…Several studies even pointed out the improved pozzolanic ability (compared with fly ash) from ground WG with particle sizes below 100 µm [5,10]. Moreover, the smaller particle sizes of waste glass can mitigate ASR expansion, as demonstrated by many reports [11,12]. Corinaldesi et al [13] observed improved unconfined compression strength and flexural strength (FS) without obvious macroscopic expansion.…”

Design, preparation, and characterization of CS/PVA/SA hydrogels modified with mesoporous Ag2O/SiO2 and curcumin nanoparticles for green, biocompatible, and antibacterial biopolymer film

“…[11][12][13] Swelling, mechanical properties, and biological properties are among the most important properties of hydrogels, each of which can affect the structure and morphology of the hydrogel. [14][15][16][17][18] The hydrogel is an adsorbent dressing with a non-stick polymer structure. [19][20][21] These wound dressings are usually made of gelatin or polysaccharide, which is cross-linked by crosslinking agents.…”