Improving the performance of waste stabilization ponds in an arid climate

Abstract

In many parts of the world, waste stabilization ponds (WSPs) are currently the preferred wastewater treatment method for municipal wastewater. The objective of this research is to examine the performance of a WSP in an arid climate region and to identify ways to improve its purification efficiency so that it can meet the criteria for reuse. The results attributed the poor performance to both improper process and physical design after 12 months of physicochemical and bacteriological analyses, as well as monitoring of operation, maintenance and loading rates. In tertiary treatment, maturation ponds are added, an increase in the capacity of the station, and management of the flow rate and retention time for each pond. By simulating the new WSP with GPS-X, the best pond area ratio obtained is 2.5 m2/capita, with a retention time of 4 days for anaerobic ponds, 20 days for facultative ponds and 3 days for two maturation ponds in series, which is suitable and provides reduction rates of BOD and fecal coliforms of 95 and 99%, respectively, with an average effluent concentration of 20 mg/L and 195 CFU. According to the results, well-maintained WSPs provide a viable, self-sufficient and environmentally friendly wastewater treatment solution for irrigation water supply in dry areas.

Evaluasi Karakteristik Air Limbah Hasil Pengolahan Waste Stabilazion Pond di Kota Jakarta

“…Sistem yang berbeda digunakan di seluruh dunia untuk pengolahan air limbah seperti lumpur aktif, trickling filter dan sistem kolam stabilisasi/waste stabilization pond (WSP). Unit pengolahan WSP umumnya digunakan untuk pemurnian limbah kota, terutama di negara berkembang, karena efektivitas biaya dan potensi tinggi untuk menghilangkan polutan (El-Deeb Ghazy et al, 2008;Gruchlik, Linge and Joll, 2018;Achag, Mouhanni and Bendou, 2021).…”