Imprinted polymer and Cu₂O-graphene oxide nanocomposite for the detection of disease biomarkers

Abstract

α 1-Acid glycoprotein (α 1-AGp) is a critical plasma protein that acts as a biomarker for different diseases when produced in large amounts (>1.2 mg ml−1). Therefore, selective, label-free, and fast detection of α 1-AGp in human serum is essential. This article presents the development of selective coatings based on molecularly imprinted polymer (MIP) matrix with boronate-affinity and Cu2O-decorated reduced graphene oxide (Cu2O-rGO) nanomaterials. The MIP-Cu2O-rGO hybrid coatings are fabricated on quartz crystal microbalance (QCM) to develop biomimetic α 1-AGp sensors. The MIP:Cu2O-rGO ratio is optimized to enhance sensing properties. Thus-designed MIP-Cu2O-rGO/QCM sensor performs sensitive and specific detection of α 1-AGp in complex mixtures. The initial assessment of the MIP-Cu2O-rGO/QCM sensor reveals an eight-fold increase in the response toward α 1-AGp compared to non-imprinted polymer. The MIP-Cu2O-rGO/QCM sensor exhibits high sensitivity (16.28 Hz ng−1 ml−1) and a low limit of detection (0.25 ng ml−1). When compared with multiple biorelevant analytes such as bovine serum albumin, lysozyme, glucose, fructose, and uric acid, the sensor shows high selectivity due to suitably oriented imprints or interaction sites that are tailored for α 1-AGp recognition. Furthermore, the MIP-Cu2O-rGO/QCM sensor can effectively detect 150–200 ng ml−1 of α 1-AGp in spiked human serum samples with a recovery rate of ∼92%. The results achieved in this study are compared with the relevant literature. The MIP-Cu2O-rGO/QCM sensor can be suitably used for the label-free, precise detection of α 1-AGp in complex mixtures.

Ensuring food safety with molecularly imprinted polymers: innovative methods for the detection of aflatoxins in food and feed samples

“…In recent years, QCM-based 10.3389/fsufs. 2023.1210104 Frontiers in Sustainable Food Systems 05 frontiersin.org sensors have emerged as a potentially useful technology for the investigation of molecular interactions on solid surfaces and the measurement of chemicals and biomolecules (Nasrullah et al, 2021(Nasrullah et al, , 2022. With the use of Au nanoparticles doped molecularly imprinted poly(2-aminothiophenol) layer and covalent organic frameworks (COF), Gu et al (2019) developed a QCM sensor for the detection of AFB1.…”

Recent Advances in Quartz Crystal Microbalance Biosensors Based on the Molecular Imprinting Technique for Disease-Related Biomarkers

“…The limit of detection was found to be 0.25 ng/mL. They also prepared non-imprinted polymer for comparison with the sensor response [154].…”