Hybrid PWM noise cancellation technique to reduce switching losses for two‐segment three‐phase motor

Abstract

This study proposed a novel method to eliminate the pulse width modulation (PWM) harmonics at a quite low switching frequency for the two-segment three-phase motor. Due to the PWM technique and considerations of switching losses, acoustic noise <20 kHz in the motor drive system is common. By using modified space vector PWM (MSVPWM) technique and interleaved topology with magnetically coupled inductors (MCIs), the proposed novel method is able to remove the first, second, and third order carrier frequency noises from the motor. The MSVPWM is used to eliminate the first and third order carrier frequency harmonics and second order harmonics are reduced by interleaved topology. With this method, the unpleasant acoustic noise <20 kHz could be removed when the switching frequency is selected near 6.7 kHz. The size of MCIs mainly depends on the PWM current harmonics and it is very small compared with inductor-capacitor/inductor-capacitor-inductor filter. Moreover, this method remains to be the control dynamics of the motor without additional inductance for fundamental frequency currents. Finally, the effectiveness of the proposed method is verified by detailed simulation and experimental results.

Development of Adaptive Spectrum Noise Cancellation Technique for Enhancing Heartbeat Rate Monitoring

“…Blood pressure is the most crucial cardiopulmonary measure, although it is difficult to monitor. Blood flow, which is correlated with blood pressure, is a second significant metric [9], [10]. Although ultrasound technology allows to check the blood flow in major arteries but practically it cannot be used frequently.…”

Untitled

“…Hasil inilah kemudian akan menjadi input untuk SMPA. Fenomena noise dan switching loss umumnya beresiko terjadi setelah proses PWM[10], yang menyebabkan bandwidth expansion akan terjadi. Oleh karena itu, diperlukan konsep lanjutan tentang akurasi lebar dan posisi pulsa pada setiap cycle di carrier frequency agar setiap proses PWM yang berdampak noise dan harmonik dapat dikurangi.Struktur Σ∆ dapat menghasilkan akurasi lebar dan posisi pulsa pada setiap cycle di carrier frequency.…”