High-resolution 3D seismic imaging and refined velocity model building improve the image of a deep geothermal reservoir in the Upper Rhine Graben

Abstract

Over the past 35 years, geothermal projects have been developed in the Upper Rhine Graben (URG) to exploit deep geothermal energy. Underneath approximately 2 km of sedimentary deposits, the deep target consists of a granitic basement, which is highly fractured and hydrothermally altered. Therefore, it has high potential as a geothermal reservoir. Despite dense 2D seismic data coverage originally acquired for oil exploration (for a target two-way traveltime between 300 and 700 ms), the faults at the top of the granitic basement (between 1400 and 4000 ms) are poorly imaged, and their locations remain uncertain. To gain a better understanding of this large-scale faulting and to ensure the viability of future geothermal projects, a 3D seismic survey was acquired in the French part of the URG during the summer of 2018. This paper describes how an integrated project, combining seismic data processing, high-end imaging, and enhanced interpretation, was conducted to improve the understanding of this complex basin for geothermal purposes. By revealing the deep granite layer and its complex associated fault network, the insight from this project can help accurately locate future production wells.

Upscaling of geological properties in a world-class carbonate geothermal system in France: From core scale to 3D regional reservoir dimensions

“…3D seismic is proving to be a very promising tool to strengthen the predictions of geothermal resources (Casini et al, 2010;Lüschen et al, 2011;Drouiller et al, 2019;Salaun et al, 2020).…”

Thermoporoelastic AVO modeling of Olkaria geothermal reservoirs

“…Kent and Louie (2013) correlate azimuthal anisotropy to geothermal-resource potential using a 3D-3C seismic survey. Particularly, high-resolution 3D seismic imaging (Salaun et al, 2020) can reveal the distribution of fracture networks of a deep reservoir. Many researches show that comprehensive geophysical data can be used to describe geothermal reservoirs (e.g., Colwell et al, 2012;Patterson et al, 2017;Vasco et al, 2020) and reduce the risk of exploration (Guitton, 2020).…”

Mapping of the Structural Lineaments and Sedimentary Basement Relief Using Gravity Data to Guide Mineral Exploration in the Denizli Basin

“…On the other hand, identifying the presence and location of smooth depressions and uplifts in a sedimentary basin's basement relief may assist in locating stratigraphic and structural oil traps [6,7]. In such research, potential field data on larger-scale surveys [8][9][10] and seismic data in more local target areas are used very effectively [11][12][13].…”