Geomechanical simulation to predict open subsurface fractures

Abstract

A B S T R A C TGeomechanical simulation of the evolution of a geological structure can play an important role in predicting open fracture development for all stages in that structure's development. In this work, three such geomechanical simulations are used to predict the evolving stress and strain fields, including dilational and compactional changes in the rock fabric in developing fault and fold systems. Their consequences for open fracture development and flow are addressed. These simulated stress and strain fields show considerable spatial and temporal heterogeneity that is consistent with deformation patterns observed in both natural examples and in laboratory-deformed analogues. But the stress and strain states that develop are neither co-axial nor do they bear a simple relationship to one another. The dilational and compactional strains, manifest as open fracturing or sealing, represent some significantly increased or significantly decreased flow rates. However, open-fracture predictions based on such geomechanical simulations are extremely difficult to validate with any degree of confidence as there is little direct evidence of sub-surface fracture distributions. In this context we also discuss possible integration of seismic anisotropy measurements, as an independent measure of open fracture alignment, to support the geomechanically derived fracture predictions. The focus of this work is on volumetric strains in fault zone evolution, though folding is also addressed.

Three-dimensional finite element simulation and parametric study for horizontal well hydraulic fracture

“…Fracture height has been recognized as one of the critical factors which can determine the success or failure of a hydraulic fracturing treatment. Many studies have been conducted for the effects of in-situ stresses, formation Young's modulus, fracture toughness and layer interfacial slip on hydraulic fracture height containment in layered formations (van Eekelen, 1982;Teufel and Clark, 1984;Thiercelin et al, 1987;Wang and Clifton, 1990;Warpinski et al, 1982Warpinski et al, , 1998Smith et al, 2001;Gu and Siebrits, 2006;Gu et al, 2008;Daneshy, 2009;Iyer and Podladchikov, 2009;Lewis et al, 2009).…”

Fracture formation due to differential compaction under glacial load: a poro-elastoplastic simulation of the Hugin Fracture

“…We follow Lewis et al (2009) and use effective plastic strain and volumetric strain to predict the opening of fractures. Von Mises effective plastic strain distribution in the model at 10.4 kyears is shown in Fig.…”

Dynamic Fluid Ingress Detection in Geomaterials Using K-Band Frequency Modulated Continuous Wave Radar

“…Laboratory studies play key roles in developing that understanding for both the geomaterial framework [15] and the contained fluids [16,17]. Laboratory studies also support the derivation of behavioural laws that underpin numerical simulations of the subsurface [18,19], to performing the numerical simulations themselves and thus provide understanding of unseen processes [20]. A large body of work already provides general understanding and associated laws.…”