Quartz crystals from the Batatal site, Minas Gerais, southern Brazil, were used to determine quantitatively primary contamination when submitting the samples to milling processes. Crushing devices used were a primary steel jaw crusher (br1), a secondary tungsten carbide (WC) crusher (br2) and a hydraulic press with stainless steel plates (pr). Fragments with suitable sizes were then ground in different Fritsch planetary mills, equipped with agate, WC and chromium‐steel rings for 7, 4 and 3 min, respectively. Solutions of the powders were analysed initially with the TotalQuant™ method in a quadrupole ICP‐MS instrument, providing semi‐quantitative results for seventy‐five elements. Contamination from crushers and mills was visible in major and minor elements such as Fe, Mn and Ti, and noticeable in trace elements such as Cr, Co, Ni, Cu and also V, Zr, Sc; significant contamination was observed from W, Mo, Co, Ta and Nb (mainly by use of the WC devices). Little or no contamination was observed for Pb, REE, Sr and Rb, elements that are important in routine isotopic determinations. Cross‐contamination was tested by grinding either a granite or a basalt sample, followed by conventional cleaning with mica‐free quartz sand, before the working quartz powder was prepared.