Geo-Environmental and Geotechnical Characterization of Municipal Solid Waste from the Selective Collection in São Paulo City, Brazil

Abstract

This paper presents the characterization of municipal solid waste (MSW) randomly collected from two Material Recovery Facilities in São Paulo city, before (input - recyclables) and after (output - rejects) the sorting processes. Geo-environmental and geotechnical tests were performed on shredded samples and a digestion method was applied to detect the metals As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn concentrations using ICP OES. The objective was to assist future activities of integrated solid waste management and soil pollution. Results showed different particle sizes comparing the input (44.6%) and the output MSW (75.1%) passing through the 100 mm sieve. Organic matter and ash contents indicated the influence of inorganic carbon due to plastics' presence, with values varying between 6-13%. The pH values obtained were neutral and the electrical conductivity of the MSW rejects suggested a higher amount of ions, with values above 1000 µS/cm. Metals analyses show that Cd, Cu, Ni, Pb, and Zn are present in high concentrations, depending on the types of the materials. Standard Proctor compaction curves yielded maximum dry unit weight varying from 6.6 kN/m³ to 10.0 kN/m³ and optimum moisture contents from 20–42%. Cohesion ranged from 1.3 kPa to 31.3 kPa and friction angle from 3.2° and 42.9°. The results are comparable with those obtained for other countries using different MSW treatments and contribute to the data basis for MSW from the selective collection, aiming the integrated solid waste management, serving for other countries that adopt MSW sorting and recycling.